DATASHEET SAFEMATE ECO+ SERIES MICROBIOLOGICAL SAFETY CABINETS • Low energy consumption DC motor blower • State of the art microprocessor control system. • Large digital display, high resolution • Air and aerosol-tight sliding sash, electrically operated by finger touch • Alarms for low air flow and wrong front window position • Sloped front and back wall for the most comfortable access • Lateral windows • Front access for filter maintenance and service • C-shaped support stand for the easiest one-man installation procedure • Easy retrofit option kits Safemate ECO+ Cabinets are supplied in four different sizes (0.9, 1.2, 1.5 and 1.8). These last generation Microbiological Safety Cabinets Class II type A2, have been certified according to the most stringent safety standards (EN12469-2000). The internal design, the air flow aerodynamics and monitoring, the built-in safety devices and the very accurate manufacturing, guarantees the highest performances at the most stringent safety levels, as specified by EN12469 standard and have been certified by the most prestigious European certification bodies for Safety Cabinets. Certified intrinsic biological safety, combined with impressively competitive prices, gives the end user a state-ofthe-art cabinet accessible to every budget, that only experienced European design and accurate quality manufacturing, can provide. BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12 – 2

The ECO+ series evolves from our best seller series with a more eco-friendly approach: the new DC Motorblowers provide high efficiency while consuming less energy and the airflows has been designed in order to reduce noise pollution, while assuring the high level of operator, product and environment protection required by the EN12469-2000 standards. Main specifications • • Microprocessor controlled DC motor blower, with volumetric sensor for exhausted air flow monitoring State of the art Microprocessor control system offering: o Large screen monitor. o Automatic control of preset airflow volumes....

Key operated. The key can be removed when the unit is in SAFE mode, in order to avoid unwanted operation. In case of power failure, the cabinet is re-set to original working conditions. Self-calibration cycle performed when cabinet is switched on. High speed rinse and set up cycle performed, before reaching the SAFE operating mode. Visual display of SAFE conditions. Pre-warning before actual alarm conditions are reached (visual and acoustic alarms) Soft touch control with keys for standard service utilities. Interconnected UV and fluorescent lights. Exhaust and recirculating flow rates ensure...

Combustible gas solenoid safety valve OPEN/CLOSE; UV light timer setting. ECO Mode activation The electronic board provides a volt-free connector to switch on/off an external blower or for alarms remotization. STANDARD UTILITIES Utilities are located on the back wall of the working area. Connectors for the utilities are located on the top of the cabinet towards the back. Vacuum tap provisioning. On the back wall, right side. Gas tap provisioning. On the back wall, right side. Electrical sockets. On the back wall. DOP sampling port. Below the work surface, left side. UV lamp installed on the back...

TECHNICAL SPECIFICATIONS DESCRIPTION 1.1 Mains supply frequency (Hz): Required power line [720 W service socket included] Absorbed power [fan and light on only]: (W): Eco+ BS version (W): Eco+ (W): Main fuses rating: SAFETY: Electrical insulating protection class [IEC 61140]: MICROBIOLOGICAL SAFETY: Microbiological class protection [EN 12469]: POWER SUPPLY Mains supply voltage (V~): Mark of conformity: Eco+ version Approvals: Electromagnetic operating area: Temperature (°C): Maximum relative humidity (%): Max MAINS supply voltage fluctuations (%): from 10 to 35 80 for temperatures up to 31 °C,...

Atmospheric pressure (mbar): 1.6 Weight [without floor stand] Overall dimensions L x D x H (mm): (without floor stand) Free space needed around the cabinet (mm): [left/right/top/front] Height of the work surface from the cabinet bottom (mm): Front aperture dimensions L x H (mm): (safe - operating height) Front aperture maximum height H (mm): (unsafe - for cleaning and loading only) Front aperture in ECO MODE H (mm): Working space dimensions L x D x H (mm): Safe working area dimensions L x D (mm): Intended life of the equipment (years): Laminar Air Flow mean velocity [EN 12469](m/s): Inflow Air...

Walls inner surface of the working area: stainless steel AISI 304 - SB finishing Working surface: stainless steel AISI 304 - SB finishing Maximum load possible on working surface (kg): [uniformly distributed] 1.8.2 GLASS PARTS 2 layers laminated safety glass Front window thickness (mm): Side windows thickness (mm): UV-C radiations minimum retention (%): Impact maximum energy sustainable (J): [EN 61010-1, clause 8.2.2] EXH filter dimensions LxDxH Filters efficiency class [EN 1822-1]: Filters global MPPS efficiency [EN 18221](%): Expected average life (h): LIGHTING Fluorescent lamps power (W):...

Minimum IP protection degree: [with cover closed] 1.9.2 Output type: contact NO – voltage free Maximum applicable voltage (V): OPTIONAL ACCESSORIES FEATURES 1.10.1 FLOOR STAND steel tube, epoxy painted Non-adjustable floor stand height (mm): Adjustable floor stand height [min – max] (mm): Non-adjustable floor stand weight (kg): Adjustable floor stand weight (kg): 1.10.2 INERT FLUIDS UTILITY fine regulation head-valve with PTFE seal tap Inert gases, vacuum, compressed air Knob material: Inlet port thread [internal / external]: 1.10.3 Valve type: ceramic head-valve tap with safety lock Usable categories...