SAFEGROW PRO CO2 INCUBATORS
12Pages

DESIGNED FOR COMFORT With their high performance and high quality the S@fegrow incubators provide the ideal environment for cell growth, whether you are using primary cell lines or stem cells. The Advanced Direct Heating system, with its 4 indipendently controlled elements and 7 thermal sensors, provides unparalleled temperature uniformity and the solid-state IR CO2 sensor guarantees the most precise control on gas levels. The seamless internal chamber and the fully removable shelving system with 4 non-perforated shelves allow for extremely easy and effective cleaning! The integrated...

A NUMBER OF FEATURES DESIGNED TO EASE YOUR WORK Double door design, with fully sealed inner glass door and outer heated door. The S@fegrow PRO can be equipped with an optional 4 inner glass door system. Solid shelves are supplied as standard to provide even surface for the culture vessels (perforated shelves available as optional). Fanless construction, with gentlest possible air movement by thermal convection, ensures low contamination risk, simplifies cleaning and decontamination and allows for long life of incubator components. Seamless, Stainless Steel 304 internal chamber (with fully...

Heated external door Inner Glass Door. Available also in 4 slots format Seamless Chamber with rounded angles for easy cleaning Fully removable shelving system with 4 non perforated shelves Passthrough hole for cables or external probes Stainless Steel water pan

AN ELEGANTLY CRAFTED STANDARD CONTROL PANEL AND DISPLAY, FOR YOUR CONVENIENCE Programmable audio-visual alarm, warning “parameter out of range”. 2 x 24 message centre, with alpha numeric display for setup and status information. Autoreset after chamber condition recovery. Temperature display in steps of 0.1°C Soft keys to access menu and modify parameters Italian Quality S@fegrow Incubators are completely made in Italy using components of italian or european origins! We use only the best for our incubators!

MAXIMUM CLEANABILITY: The inner chamber is derived from a single sheet of stainless steel, resulting in a seamless surface with big round corners Shelving system is fully removable with no fixtures on the inner chamber’s walls Water is placed inside an easily removable and cleanable dedicated steel pan No air circulation channels or conduitsAdvanced Advanced Direct Heat system: The Direct Heat system has been designed to provide top level performances in term of uniformity and recovery: 4 indipendent heaters controllers maximum precision! 73 meters of heating elements on 6 sides maximum...

FULL PERFORMANCE: NO FANS ATTACHED! Temperature recovery test: Incubator set point 37°C; Temperature probes: 9 probes/shelf; Room temperature: 21°C; Door opening: 15 seconds. Green dashed line represents nominal uniformity (+/- 0.3°C from set point); Red dashed line is +/- 0.2°C from set point. S@fegrow’s Advanced Heating System has been designed to provide top level performances without requiring any help from active air circulation fans! The system allows to recover nominal temperature uniformity after only 4 minutes following a door opening of 15 seconds! (see graph, green dashed line)...

UNIFORMITY WHERE IT’S MOST IMPORTANT! Using perforated shelves creates cold spots due to the different thermal conductivity of air and steel: these may have unwanted effects to cells’ growth patterns. The S@fegrow PRO is supplied with 4 non perforated shelves to increase temperature uniformity where it counts the most: near your cells!! Moreover the solid surface is extremely easy to clean, keeping the risk of contaminations under control! STANDARD UTILITIES PART NUMBER CO20010 S@fegrow PRO - CO2 Incubator - 230 Volts, 50/60 Hz - Double Door w/Glass - Right open (hinges on the left) – HT...

TECHNICAL DATA TEMPERATURE CONTROL Temperature range 10-50° C in 0.1 increments (minimum setting: ambient +5° C) Temperature measurement Seven RT curve matched thermistors Temperature control Temperature accuracy Temperature uniformity Temperature recovery About 4 minutes following a 15 seconds door opening Over Temperature protection Independent, inhibits all heaters above 1.0° C over set temperature value (in the unlikely event of a control system failure) Solid State IR Sensor, automatic atmospheric CO2 zeroing. Measurement is independent from chamber humidity level Recovery rate About 5...

MORE THAN 40 YEARS OF EXPERIENCE The experience of BioAir® in manufacturing Biohazard and Laminar Air Flow cabinets goes back to the early 70s’, when the brand Gelaire® became the “gold standard” for airborne contamination control in many laboratories throughout the world. A family of Recirculating Fume Hoods, based on the adsorption of toxic vapors by means of charcoal filters, was successfully introduced a few years later, thus characterizing the Company as the only one really focused on the protection of the operators and inspired by its motto: This unique know-how was cherished and...

the scientists involved in growing cells in vitro. of microbiological safety cabinets, laminar flow cabinets and fume cupboards, encompassing more than 15 models, with many of them available in different sizes; customized models and/or designed for specific applications can be produced thanks to the competence of a team of skilled engineers and dedicated workers. The core business of the recently established BioAir® Industrial Team is the design, manufacturing and validation of customized equipment for the protection of the operator and of the product within pharmaceutical and healthcare...

BioAir S.p.A. Via Figino, 20/22 20016 Pero (MI) Italy T +39 0382 66721 M info@bioair.it www.bioair.it