DATASHEET EmbryoS@fe iREF Laminar flow cabinet with operator & environment protection for IVF The EmbryoS@fe iREF workstation series has been developed to provide the most controlled and safe environment for Embryo cell culturing. The heated work surface keeps the cells at a constant temperature during all the steps, creating a more uniform growth and/or differentiation behaviour. This allows to make sure that experiments involving the use of those cells return more consistent results. The possibility to install one or two (on the 1.8 size cabinet) microscopes in the working area allows the operators to check on their cells while still in a safe, sterile environment. The EmbryoS@fe iREF cabinets is a high retention efficiency recirculating cabinet engineered according to the EN12469:2000 European Standard for Microbiological Safety Cabinets, that offers Product, Operator and Environment Protection. BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12 – 27010 Siziano (PV) It

The specially designed air flows allow users to work in full safety, allowing the use of viral vectors or cells of human origin by providing the same level of protection of a Class II cabinet, even with the microscopes installed in the working area! A complete and user friendly tool for the manipulation of Embryo cells that only experienced European design with over 40 years of know how and accurate quality manufacturing, can provide. TECHNICAL SPECIFICATIONS • Ready for the installation of 1 Olympus SZX10 or SZX16 stereo microscopes (lighting base included, microscope is not included and must...

o Continuous monitoring of front barrier air flow for the highest operator safety o Low barrier alarm o Power failure alarm • Volt-free contact for remote monitoring of exhaust fan. • Automatic reset of initial conditions in case of power failure Mechanical and Functional specifications • Front glass, main filter and back wall sloped for better visibility and air flow uniformity. • Exhaust HEPA filter fully visible for visual inspection of filter’s integrity. • Main HEPA filter maintenance and changing from the front of the cabinet • Programmable UV light kit (delay and exposure times) via cabinet...

SPECIFICATIONS DESCRIPTION Reference Standard: Electrical insulating/protection class [IEC 61140]: Mains supply voltage: Main fuses rating: Required power line (W): (700 W service socket included) Absorbed power (W): (fan and light on only) Sustained impact maximum energy of the glass [EN 61010-1, clause 8.2.2] (J): Window glass UVC radiations retention (%): Electrical service socket max current (A): Temperature (°C): Maximum relative humidity (%): from 10 to 35 80 for temperatures up to 31 °C, decreasing linearly to 50 at 40 °C Max MAINS supply voltage fluctuations (%): TRANSIENT OVERVOLTAGE...

TRANSPORT AND STORAGE CONDITIONS Relative humidity (%): Atmospheric pressure (mbar): Front aperture dimensions L x H (mm) : Working space dimensions L x D x H (mm): Overall dimensions L x D x H (mm): (without support stand) Safe working area dimensions L x D (mm): Main structure: Working space surface: cold rolled steel, stove enamel coated RAL 7035 stainless steel AISI 304 - SB Front and side walls windows: laminated safety glass Laminar Air Flow mean velocity [EN 12469](m/s): Inflow Air Barrier mean velocity [EN 12469](m/s): Exhaust Air flow rate (m3/h): Exhaust Air flow ratio (%): Apf - Aperture...

HEPA FILTERS DIMENSIONS AND SPECIFICATIONS LAF filter dimensions L x D x H (mm): EXH filter dimensions L x D x H (mm): Filters efficiency class [EN 1822-1]: Filters global MPPS efficiency [EN 18221](%): STANDARD ELECTRICAL EQUIPMENT Main switch with all-position removable key Automatic electronic airflow velocity control PCB 2nd motorblower (fan) Fluorescent lamps (2x) MAIN SUPPLY CORD The mains supply cord is a detachable flexible cord with IEC 60320 C13 female mains connector and CEE 7/7 mains plug (French-German) moulded at either end. It complies with IEC 60227 or IEC 60245 and it is approved...