AURA HZ Series Crossflow cabinets Aura HZ48T – LH20500 Aura HZ72T – LH30500 AURA HZT Series Quality with a flair of tradition Technical Specifications • • • • Horizontal laminar air flow cabinet. Last generation Microprocessor control Automatic airflow monitoring Reduced air flow switch • H14 filter with micromesh downstream equalising plenum for the highest airflow speed uniformity • Micromesh foil for maximum eye comfort. • Side glass walls with Lateral Flow Effect (LFC) assembly. AURA HZT cabinets are supplied in two different sizes (1.2mt and 1.8mt). These state of the art crossflow cabinets, provide an ultimate cleanliness ISO3 work area where the highest safety for the products is achieved. The internal design, the air flow aerodynamics and monitoring, the special H14 filter with Micromesh downstream equalising plenum, guarantees the highest performances at the most stringent safety levels and operator comfort. A complete and user-friendly tool for the protection of highly sensitive products that only experienced European design with over 35 years of know how and accurate quality manufacturing, can provide. BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12 – 270

Main specifications 1. Automatic air control: AURA HZT is a horizontal laminar air flow cabinet, ISO3 as per ISO14644-1, for product protection from external contamination and cross-contamination inside the working chamber. The air speed is, for the highest product safety, permanently controlled. 2. Lateral Flow Concept side walls: special tempered-glass side walls are installed inside the air flow, to prevent any leakage from the outside, thanks to the Venturi-effect. 3. Operating mode: the air flow, leaving the HEPA filter at a constant speed, produces an extremely clean - better than Class...

Filter global MPPS efficiency (EN1822-1): MPPS size (EN1822-1): Working area class (EN14644-1): Laminar Air Flow mean velocity (m/s): Air Flow Rate (m3/h): 1.2 TRANSPORT AND STORAGE CONDITIONS Ambient temperature (°C): Relative humidity (%): Atmospheric pressure (mbar): 1.3 indoor up to 2000 m from 5 °C to 40 °C 80% for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C ±10% II 2 Maximum relative humidity: Max MAINS supply voltage fluctuations: TRANSIENT OVERVOLTAGE CATEGORY: POLLUTION DEGREE: 1.4 Main structure: Work surface: Side walls: cold rolled steel with epoxy paint coating...