triogen® O3 M Series ozone generators are utilised for large volumes of water. These selfcontained units provide exceptional disinfection with effective treatment against chlorine resistant micro-organisms, oxidation of various organic matter and flocculation of colloidal particles, which significantly improves water quality. Commercial pools Hotel and club pool Aquariums and water parks Fountains and features waters Safely lower free chlorine residual with effective disinfection including chlorine resistant micro-organisms Chloramine destruction reducing "red eye" and irritation of skin and respiratory system Significant improvement in water clarity and air quality Helps to inhibit the growth of algae Trihalomethane (THM) levels are minimised Simple to install and operate with minimal plant room space requirement Designed for maximum operator and bather safety MAIN FEATURES • Ozone safely generated and injected under vacuum • Patented ‘Free tube’ ozone module design • Colour touch screen 7” HMI on control panel • Self-contained system (single enclosure) • Refrigerated air pre-dryer (M7 models only) • Dew point Monitor (standard on M7 or optional on M6) • triogen® O3 M models can be supplied with constant ozone output or automatic regulation to suit the intended process. • The system operates under vacuum conditions created by a water driven venturi ensuring maximum safety in operation. • Internal partitioning with removable access doors for ease of maintenance • Pool water used as cooling water medium • CE certified, manufactured to ISO 9001 : 2015 Ozone is produced when air is passed over a dielectric ozone generating module. triogen® O3 incorporates the patented "Free Tube" module design which gives excellent dielectric reliability and decreases maintenance requirements. The ozone modules have a PVC outer body fitted with stainless steel liner tubes to give long term resistance to chlorinated water allowing pool water to be used in the generator cooling system. The dielectric tubes and electrodes are suspended within the liner tubes which removes expansion stresses from the dielect

TECHNICAL DATA M6 MODEL Ozone Output Ozone Output Power Consumption TECHNICAL DATA M7 MODEL Power Consumption QUALITY STANDARDS ELECTRICAL SUPPLYS 380-415V/3ph/50-60Hz Voltage to be confirmed at time of order Enclosures: mild steel, polyester coated Patented Ozone module: 316L stainless steel lined PVC outer body Air dryer: mild steel, epoxy coated REMOTE CONTROLS AND SIGNALS Digital Inputs: Remote booster pump start-stop, remote ozone start-stop, ozone output Digital outputs: Booster pump fault, ozone ON Dew point meter (if dew point monitor is fitted) Air flow alarm switch Water flow switch...