triogen® LAB2B is a corona discharge type ozone generator with variable ozone output. Producing up to 4g O3/h using air and 10g O3/h using oxygen. It is designed specifically for laboratory research. • Research and development • Education • Laboratories MAIN FEATURES • Ozone generator producing up to 10g/hr • Feed gas: oxygen (PSA) or ambient air The LAB2B ozone generator is a small air-cooled unit specifically designed for bench use incorporating function indicators, feed gas flowmeter and variable output control. Output variation is manually adjustable using a control knob mounted on the front panel. Operating on various feed gases such as dried air or oxygen, the LAB2B is capable of producing concentrations up to 10% volume. Ozone is produced when oxygen gas is passed over the ceramic dielectric of an ozone generating module . The module is powered by a high voltage/high frequency power board. The electronic power board is designed for either intermittent or continuous operation. The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air. PRODUCT HIGHLIGHTS Variable ozone output up to 10g O3/h Operate under vacuum or at maximum pressure of 10psig Illuminating switches indicating ozone production and faults Air cooled O&M manual including performance graphs Feed gas: air or oxy

feed gas flow rate TECHNICAL DATA MODEL Variable output control Power supply Power Consumption l/min oxygen (1) feed gas: dry-air-60° C dewpoint (2) feed gas: 100% oxygen (3) Voltage to be confirmed at time of order TECHNICAL FEATURES Operating method: vacuum or pressure (10psi max.) Module cooling medium: ambient air (fan assisted) Connections: PVDF compression fitting to suit 8 mm (0.31 inch) OD PIPE • Enclosure: mild steel, epoxy coated • Module: 316 stainless steel electrode assembly inside a ceramic dielectric tube supported by P.T.F.E end caps REMOTE CONTROLS AND SIGNALS • Ozone ON-OFF:...