Microwave Based Solids Flow Detection Sensor The Flow Detect 2000 is a reliable, non-intrusive instrument for the detection of solids flow or no flow in various applications in the material handling industry. It prevents downtime caused by blockage, conveyors running empty, no material flow to-and-from a process, or loose slide gates that can cause production loss and equipment failure. This affordable, non-intrusive, microwave-based flow/no flow instrument is used to detect flow conditions of solids and powders in gravity chutes, feeders, pipelines, conveyor belts, or bucket elevators. The Flow Detect 2000 contains the sensing element, power and output connections, and user adjustment controls in a single NEMA 4X enclosure. It offers hazardous location approvals for operations requiring optional protection from explosive dust. Helps Prevent Cross Contamination The sensor is easy to install through a 1-/14” NPT opening. It is completely non-intrusive and does not come into contact with the flow stream. This eliminates the risk of wear and assures long life and reliability It is appropriate for solids, granules, pellets, meals and powdered materials and is suitable for most any industry including feed, grain, milling, food, cement, mining, power and plastics. An important use is to prevent cross contamination of ingredients by ensuring flow has stopped before a new material is introduced into the flow stream. Reliable Flow/No Flow Detection • Single-piece design eliminates separate controller • Detects solids, granules, pellets, meals & powders • Low power microwave Doppler technology M • No contact with the material flow stream • Installs quickly & easily in 1-1/4” NPT filling • Optional saddle style pipe mount kit available • Ideal replacement for mechanical switches • Hazardous location approvals available Proper mounting of the Flow Detect 2000.

Principle of Operation The Flow Detect 2000 emits a low power microwave signal toward the material being monitored. Part of this signal is reflected off the material back to the antenna of the FD 2000. This reflected signal combines with the emitted signal to produce a beat frequency, which is the difference in frequency between the two signals. If the material being monitored is not moving, the reflected signal will be the same frequency as the emitted signal and there will be no beat frequency produced. However, if the material is moving, the reflected signal will be shifted in frequency and...