Catalogs >
BinMaster >
3DLevelScanner

3DLevelScanner
1 / 8Pages

Catalog excerpts

3DLevelScanner Multiple-Point Measurement for Accurate Volume Get connected to your inventory with the only level sensor that measures and maps multiple points on the material surface. A 3D image representing the topography inside the silo indicates buildup, cone up or down conditions. 3DVision software accounts for irregular material surfaces when calculating volume. The 3DLevelScanner’s acoustics-based technology penetrates dust ensuring reliable measurements. This non-contact technology accurately measures solids and powders, including low dielectric materials. And you can get it only from BinMaster.

Open the catalog to page 1

How 3D Level Scanning Works The 3DLevelScanner uses acoustics-based technology. Three transducers send very low frequency sound waves to the material surface. The sensor receives echoes back from multiple points on the surface 3DLevelScanner Anatomy Head: houses electronics which are converted to distance measurements. Advanced algorithms in the software assign each measurement an XYZ coordinate that is mapped into a 3D image. The software generates a graphical representation of the material topography in the bin. Surface variations are accounted for in volume calculations. Navigation:...

Open the catalog to page 2

Grain, Seed, & Feed 3D Excels in Many Industries and Materials Chemical Processing Mining & Metals Ethanol & Bioenergy Pulp, Paper & Wood Cement & Concrete Food or Beverage Processing Plastics Manufacturing Coal Power Plants Sand & Aggregates Construction Materials Corn, soybeans, wheat, rice, or milo used in human and animal food production. Fine powders such as bauxite, bentonite, alumina, potash, talc, or calcium carbonate. Measuring limestone, aggregates, clinker, and finished cement. A popular sensor for measuring coal and fly ash silos at power plants. Accurate volume for corn storage...

Open the catalog to page 3

3D Makes a Difference Dust Penetrating Multiple Measurements Considers irregular material topography in calculating volume. No risk of contamination or interference with equipment inside the bin. Detects Silo Buildup Detects and alerts to excessive piling that could stress silo walls. Exterior of the sensor is coated with dust, while self-cleaning properties keep the transducers clean and functional. The only level sensor to detect surface variations. Volume Accuracy Fully operational sensor on cement silo despite aggressive dust. Reliable operation and level measurement in suspended dust....

Open the catalog to page 4

3D Model Selection Guide M Maps and Measures 70° The M model takes measurements within in a 70° beam angle. It reports the highest, lowest, and average level. 3DVision software provides highly accurate level and volume data. The MV has all the capabilities of the M model, but also generates a 3D representation of the material surface. Plants that work with materials that bridge, rat hole, or build up along bin walls may prefer to add 3D imagery. The MVL provides volume accuracy in large diameter bins. Multiple scanners are mounted in strategic locations to account for surface variations...

Open the catalog to page 5

10' diameter is the minimum 10' diameter is the minimum Beam Angle Output Data Volume plus minimum, maximum, 3D visualization, volume plus minimum, Volume plus minimum, maximum, and average distance maximum, and average distance and average distance Best Application Wide bins, taller than Wide bins, taller than they are wide Very wide bins, bins with multiple filling or discharge points The M and MV can be used on larger diameter bins than specified, but with decreased accuracy since the beam angle will not span the entire surface. The MVL is used on large diameter bins to increase volume...

Open the catalog to page 6

Mounting and Accessories 0° Mounting Flange The 3DLevelScanner mounts through an 8-1/2” or larger opening in the bin roof. To secure and stabilize the sensor on flat bin roofs, a 0° mounting flange is used to suspend the transducer into the bin while keeping the sensor head outside of bin for programming access. Angled Mounting Flange It is essential the 3DLevelScanner is mounted vertically and perpendicular to the ground. To ensure the sensor is mounted properly on angled bin roofs, BinMaster offers mounting flanges for 5°, 10°, 15°, 20° and 30° angles. Neck Extensions The 3DLevelScanner...

Open the catalog to page 7

3DLevelScanner Specifications Measurement Characteristics Frequency Beam angle Materials, Non-Wetted Parts Housing Inspection Window in Housing Cover Antenna Flange Painted aluminum die casting Polycarbonate Painted aluminum die casting Steel Output Variable Output Signal Resolution Fault Signal Current Limitation 4 - 20 mA/HART, RS-485, Modbus RTU, TCP/IP 10 µA Current output unchanged, 22 mA > 3.6 mA (adjustable) 22 mA Ambient Conditions Ambient, storage and transport temperature Relative humidity Altitude Process Conditions Vessel Pressure Process Temperature Measured on the Process...

Open the catalog to page 8