Catalogs >
BinMaster >
3D Technical Data Brochure

3D Technical Data Brochure
1 / 4Pages

Catalog excerpts

Technical Data Sheet Non-Contact, Multiple-Point Measurement The 3DLevelScanner is a non-contact, dust-penetrating bin measurement device that measures and maps irregular surfaces in powder or solid materials and then calculates highly accurate bin volume estimates. Level Sensor

Open the catalog to page 1

Overview Accurate Volume Measurement The BinMaster 3DLevelScanner uses non-contact, dust-penetrating technology to provide unsurpassed bin volume accuracy. Unlike conventional single point devices, it works by measuring multiple points within the bin. The 3DLevelScanner uses a very low frequency acoustical signal to penetrate dust and take measurements which are determined by how long the signal takes to “travel to” solid or powder material and “return to” the device. This technology is proven to perform in powders and bulk solids, determining a highly accurate volume of materials contained...

Open the catalog to page 2

Technical Data Materials, Non-Wetted Parts Housing Inspection Window in Housing Cover Antenna Flange Painted aluminum die casting Polycarbonate Painted aluminum die casting Steel Thread version Output Variable Output Signal Resolution Fault Signal Current Limitation 4 - 20 mA/HART, RS-485, Modbus RTU, TCP/IP 10 µA Current output unchanged, 22 mA > 3.6 mA (adjustable) 22 mA Ambient Conditions Ambient, storage and transport temperature Relative humidity Altitude Process Conditions Vessel Pressure Process Temperature Measured on the Process Fitting Vibration Resistance -40˚ to +185˚F (-40˚ to...

Open the catalog to page 3

with horn antenna in flange version with horn antenna in threaded version 142.5 (5.61") The power supply range can differ depending on the instrument version. See the Technical Data section for full details. In hazardous areas, take note of the appropriate regulations, conformity and type of approval certificates for the sensors and power supply units. Power Supply Shipping Address: 7201 N. 98th St. Lincoln, NE 68507 Mailing Address: P.O. Box 29709 Lincoln, NE 68529 Electrical Connection & Wiring General Requirements Power supply and signal current are carried on two separate connection...

Open the catalog to page 4