video corpo

3D Lev el Scanner with IECEX-ATEX Brochure
1 / 1Pages

Catalog excerpts

3D Lev el Scanner with IECEX-ATEX Brochure - 1

3D Level Scanner with IECEX/ATEX approvals Get more accurate inventory with the only level sensor that measures and maps multiple points on the material surface. Software creates a 3D image of the topography inside the silo. 3DVision software accounts for irregular material surfaces when calculating volume. Dust-penetrating, non-contact technology ensures reliable measurements in solids and powders, including low dielectric materials. It has IECEx/ATEX approvals. And you can get it only from BinMaster. Plants use 3D tech • Measures multiple points on the material surface • Generates a 3D image of the material topography • Volume accuracy surpasses any single-point device • Reports minimum, maximum, and average distances • Detects cone up or down conditions • Sees sidewall buildup that could cause structural damage • Measures topography in segmented silos • Accurate volume in large bins using multiple scanners Acoustics technology multiple-point measurement Three transducers send extremely low frequency sound waves across the material surface. The sensor receives echoes back and converts echoes to distance measurements. Advanced algorithms in the software assign each measurement to an XYZ coordinate and maps it to its location. Software reports the minimum, maximum and average distance. Optional software generates a graphical representation of the material topography in the bin. Surface variations are accounted for in volume calculations. Bin Height Up to 200’ tall Up to 200’ tall Up to 200’ tall Up to 200’ tall Up to 200’ tall Bin Diameter 10’ diameter minimum 10’ diameter minimum 10’ diameter minimum 10’ diameter minimum 10’ diameter minimum Beam angle 70° 70° 70° 30° 15° Output data Volume plus 3D visuals, volume 3D visuals, volume plus Average volume Single distance minimum, max, and plus minimum, max, minimum, max., and ave. ave. distance and ave. distance distance Best application Wide bins, taller than Wide bins, taller than Very wide bins with multiple Narrow silos up to 14’ Narrow silos or basic they are wide they are wide filling or discharge points. in diameter level indication Level Controls and Software

Open the catalog to page 1

All BinMaster catalogs and technical brochures

  1. Airbrator

    2 Pages

Archived catalogs

  1. Airpad

    2 Pages

  2. NCR-84

    4 Pages

  3. DPM-100

    8 Pages

  4. VR-0515-NPC

    4 Pages

  5. WT 19

    3 Pages

  6. WL 19

    3 Pages