Catalogs >
Binks >
Lubricating Oil

Lubricating Oil
4Pages

Catalog excerpts

PRODUCT NAME: LUBRICATING OIL MSDS#: MSDS-22 ITW INDUSTRIAL FINISHING ֖ Page 1 of 4 > COPYRIGHT ITW Industrial Finishing PRODUCT RELATED HEALTH DATA SHEET INGREDIENTS CAS REG NO. WGT . % ACGIH TLV ACGIH STEL OSHA PEL OSHA STEL UNITS Oil Mist in Air 5 mg/cubic meter 5 mg/cubic meter > (Not encountered in Normal Use) POTENTIAL HEALTH EFFECTS PRIMARY EXPOSURE ROUTES: Skin Eyes ֖ Inhalation Ingestion ACUTE EFFECTS Eye: Eye contact may result in irritation. Skin: Prolonged or repeated skin contact may cause skin irritation. Ingestion: Minute amounts aspirated into the lungs during ingestion may cause mild to severe pulmonary injury. Inhalation: Vapor pressure is very low and inhalation at room temperature is not a problem. If overcome by vapor from a hot product mild to severe pulmonary injury may occur. CHRONIC EFFECTS Eye: No long-term adverse effects are known. Skin: No long-term adverse effects are known. Ingestion: This product has a low order of acute oral toxicity, but minute amounts aspirated into the lungs during ingestion may cause mild to severe pulmonary injury. Inhalation: If overcome by vapor from a hot product mild to severe pulmonary injury may occur. CARCINOGENICITY: Not listed as a carcinogen or potential carcinogen by the NTP, IARC, and OSHA. TARGET ORGAN EFFECTS: None known. MEDICAL CONDITIONS AGGRAVATED by LONG-TERM EXPOSURE: No known medical conditions are aggravated by exposure to solution. >

Open the catalog to page 1

PRODUCT NAME: LUBRICATING OIL MSDS#: MSDS-22 ITW INDUSTRIAL FINISHING ֖ Page 2 of 4 > EYE CONTACT: In case of contact, flush eyes with plenty of water for at least 15 minutes or until irritation subsides. Physician should be contacted ion persist. should irritat SKIN CONTACT: Remove any contaminated clothing and wash skin with soap and warm water. HIGH-PRESSURE INJECTION UNDER SKIN: If ingested call a physician immediately. Do not induce vomiting. If injected by high pressure under skin, regardless of the appearance or its size, contact a physician IMMEDIATELY. Delay may cause loss of...

Open the catalog to page 2

PRODUCT NAME: LUBRICATING OIL MSDS#: MSDS-22 ITW INDUSTRIAL FINISHING ֖ Page 3 of 4 children: minimize body contact with this product as well as all chemicals in general. OTHER INFORMATION: Remove oil-soaked clothing and launder before use. Use normal hygiene practice. Wash hands thoroughly before eating, drinking, smoking and using restroom after contact. Keep away from children. > APPEARANCE: sparent amb oil. Traner PHYSICAL STATE: Liquid/Oil. ODOR: Mineral oil odor ODOR THRESHOLD (PPM): Not established SPECIFIC GRAVITY (H2O=1): 0.87 0.90 SOLUBILITY IN WATER (20ֺC) : Negligible SOLUBILITY...

Open the catalog to page 3

PRODUCT NAME: LUBRICATING OIL MSDS#: MSDS-22 ITW INDUSTRIAL FINISHING ֖ Page 4 of 4 OSHA HAZARD STATUS: > None. EPA SARA Sec. 311/ 312 HAZARD CATEGORIES: ne. No WHMIS Canada: Not a controlled product. TOXIC SUBSTANCES CONTROL ACT (TSCA): All ingredients are on the TSCA ed on the TSCA inventory. inventory or are not required to be list SARA Title III, Section 313, CHEMICALS: Zinc Compounds < 2% CALIFORNIA Proposition 65 List: Not on List. NEW JERSEY RIGHT-TO-KNOW HAZARDOUS SUBSTANCES LIST: Not on List. MASSACHUSETTS RIGHT-TO-KNOW SUBSTANCE LIST: Not on List. PENNSYLVANIA HAZARDOUS SUBSTANCES...

Open the catalog to page 4