Catalogs >
Binks >
Booth Coat Clear Strippable Coating

Booth Coat Clear Strippable Coating
4Pages

Catalog excerpts

PRODUCT NAME: Booth Coat Clear Strippable Coating MSDS#: MSDS-2 ITW INDUSTRIAL FINISHING ֖ Page 1 of 4 > COPYRIGHT ITW Industrial Finishing PRODUCT RELATED HEALTH DATA SHEET INGREDIENTS CAS REG NO. WGT . % ACGIH TLV ACGIH STEL OSHA PEL OSHA STEL UNITS HAZARDOUS INGREDIENTS NONE No reportable quantities of hazardous ingredients are present. > POTENTIAL HEALTH EFFECTS PRIMARY EXPOSURE ROUTES: Dermal Ingestion - Eyes. ACUTE EFFECTS Eye: Caution. Contact with the eye may produce irritation and redness. Over mist and dust may be irritating to the eyes. spray Skin: Prolonged or repeated skin contact may cause irritation and discomfort. The product is absorbed through the skin. Continuous and prolonged skin contact with the liquid material may result in skin irritation and should be avoided. Ingestion: Can cause nausea and vomiting. Inhalation: Over spray mist, contain trace components and residual monomer vapors, may be irritating to the mucous membranes, respiratory tract, and may produce symptoms of headache and nausea in poorly ventilated areas or if ufficient and concentration of vapors are allowed to occur. booth draw is ins CHRONIC EFFECTS Eye: No long-term adverse effects are known. Skin: Prolonged or repeated exposure may dry the skin. The product is absorbed through the skin and may cause nausea, headache and general discomfort. Symptoms may include redness, burning, drying, and cracking. Ingestion: None established. Inhalation: Mild respiratory tract irritant. CARCINOGENICITY: Not listed as a carcinogen by the NTP, IARC, or OSHA. TARGET ORGAN EFFECTS: None known. MEDICAL CONDITIONS AGGRAVATED by EXPOSURE: Available information suggest that overexposure is unlikely to aggravate existing medical conditions. >

Open the catalog to page 1

PRODUCT NAME: Booth Coat Clear Strippable Coating MSDS#: MSDS-2 ITW INDUSTRIAL FINISHING ֖ Page 2 of 4 > EYE CONTACT: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes lifting eyelids to insure complete removal. Get medical attention if irritation persists. SKIN CONTACT: Wash affected area with soap and water. Remove clothing and reuse. wash before INGESTION: Call a physician or get medical attention or call a poison control center immediately. INHALATION: Move victim to an area of fresh air. Seek medical attention if irritation persists. > FLASH POINT...

Open the catalog to page 2

PRODUCT NAME: Booth Coat Clear Strippable Coating MSDS#: MSDS-2 ITW INDUSTRIAL FINISHING ֖ Page 3 of 4 > EYE and FACE PROTECTION: Chemical splash-proof safety goggles in compliance with OSHA regulation should be worn for a high degree of eye protection. A face shield may be worn over chemical goggles for face protection. (Consult your safety equipment supplier.) SKIN and HAND PROTECTION: Rubber gloves should be worn if continual contact with material is anticipated. A rubber apron may be worn to prevent contact with clothing. RESPIRATORY PROTECTION: A dust particulate respirator must be...

Open the catalog to page 3

PRODUCT NAME: Booth Coat Clear Strippable Coating MSDS#: MSDS-2 ITW INDUSTRIAL FINISHING ֖ Page 4 of 4 > MOBILITY: Not Determined. DEGRADABILITY: Not Determined. ACCUMULATION: Not Determined. ECOTOXICITY: Not Determined. OTHER ADVERSE EFFECTS: Not Determined. > DISPOSAL METHOD: Disposal should be made in accordance with federal, state and local regulations. Products classified as non-hazardous may become hazardous waste upon contact with other products. Refer to 40 CFR Protection of Environment Parts 260-299Ԕ for complete waste disposal regulations. > U.S. D.O.T. PROPER SHIPPING NAME: Not...

Open the catalog to page 4