Catalogs >
Binks >
AA1600M

AA1600M
6Pages

Catalog excerpts

& AA4400M Air Assist Airless Spray Guns Flat Tip, Fine Finish Tip, or Twist Tip Options ADJUSTABLE SPRAY PATTERN • LARGE TIP SELECTION • ERGONOMIC GRIP New design provides comfort for the operator, a superior quality finish, and maximum efficiency www.binks.com

Open the catalog to page 1

& AA4400M Air Assist Airless Spray Guns COMPLETELY NEW! The Binks Air Assist Airless spray guns are designed to maximize quality, increase production, reduce downtime, and be environmentally responsible, while providing the fit and feel that operators demand. Here is what our customers have to say: • A heavy industrial user of the AA4400M was able to go from using two guns to spray a metal surface, to using the same gun for both the inner and outer surfaces, while improving the finish quality on both surfaces. • A cabinet manufacturer using the AA1600M states, “This gun has easy handling...

Open the catalog to page 2

To change from flat tip to twist tip, you must: 1. Replace Fluid Seat, Air Cap & Tip Guard 2. Add a Twist Tip brace HVLP Flat / Fine Finish Tip Parts 3 Different Tip Options Available: Premium tips for a uniform pattern 1. Flat Tip Guard (54-5794) 2. Flat Tip Air Cap (54-5795-K) 3. Flat Tip (114-xxxxx) 4. UHMW Seat (54-5811-K); Tungsten Carbide Seat (54-5799-K) HVLP Twist Tip Parts Pre-orifice for best particle distribution Reduces downtime caused by tip clogs 5. Twist Tip Guard 6. Twist Tip (9-xxx-75) 7. Twist Tip Air Cap 8. Twist Tip Brace 9. UHMW Seat (54-5833-K); Tungsten Carbide Seat...

Open the catalog to page 3

An Air Assist Airless Gun for all your applications! i with UHMW Seat: Ideal for wood, metal, truck and bus, or aerospace • aA4400M with Tungsten Carbide Seat: For high viscosity fluids and heavy industrial applications

Open the catalog to page 4

Tool Specifications HVLP Test Caps: 54-5836-K (Flat tip), 54-5837-K (Twist tip)

Open the catalog to page 5

For additional parts, refer to service bulletins 77-2921 & 77-2922. Part No. Fan width based on 1000 PSI with water 12" from surface. Actual results may vary, depending on material viscosity. Twist Tip Selection When converting from flat tip to twist tip, increase pattern size by 2" and use air adjustment to turn down to original size. Part No. Description Orifice Fan Width (In.) Turns to remove clogs quickly & easily. Fine Finish Flat Tip Selection Part No. Description Orifice 9-0909-F FINE FINISH TIP .009 Fan Width GPM Capacity (In.) @500 PSI Water .039 FINE FINISH TIP FINE FINISH TIP...

Open the catalog to page 6