Best conditions for your success VACUUM DRYING CHAMBERS EN

Vacuum drying chambers Vacuum drying chambers Series VD Both BINDER vacuum drying chamber models enable effective drying without residue or damaging the material being dried. With their proven technological features, the excellently address the strict requirements of industrial and scientific laboratories. Samples and similar materials incorporating flammable and non-flammable solvents can be dried, depending on the individual use. The chambers use a unique safety design that, together with accustomed outstanding performance, sets the bar in terms of quality and safety.

EXPLOSION-PROTECTED INTERIOR AUTOMATIC DRYING DETECTION thanks to the ATEX-compliant unit concept with pressure control device for heating activation at a vacuum of < 100 mbar. The unit conforms to ATEX category EX II 2/3/- G IIB T3 Gb/Gc/- X. Thanks to the program control, the second pressure drop that typically takes place at the end of drying is detected and the interior is automatically ventilated. TESTED SAFETY JACKET HEATING thanks to the shatterproof, spring-mounted safety glass panel, inert gas connection for interior flushing, and electronic components decoupled from the interior. optimum...

Series VD | Vacuum drying chambers IMPORTANT CHARACTERISTICS Fast, gentle drying Optimum heat transfer through large thermal conducting plates Safe work thanks to proven safety concept Also option of modular complete system with vacuum pump and pump chamber Temperature range: +9°C above ambient temperature to +220 °C Controller with digital display of pressure and temperature Program-controlled drying monitoring with automatic ventilation at end of process Internal data logger, measured values can be read out in open format via USB 1 aluminum expansion rack, can be custom-positioned Inert gas...

Vacuum drying chambers | Series VD OPTIONAL EQUIPMENT Expansion racks Analog output for temperature and pressure values The expansion racks ensure maximum heat transfer to the items to be dried. You can choose between aluminum and stainless steel racks. For external monitoring and evaluation of process parameters, option of integration into on-site systems. For the convenient selection of different ventilation types, with air or inert gas. The valves Universal ventilation can be actuated in a targeted manner via the controller or the APT-COM Multi Management Software. Universal access port DN...

Series VD | Vacuum drying chambers TECHNICAL DATA Data Designation Option model Temperature range +9 °C above ambient temperature to 220 °C +9 °C above ambient temperature to 220 °C +9 °C above ambient temperature to 220 °C Performance Data Temperature Vacuum Data Leak rate Pressure fluctuation over time at 50 mbar Pressure fluctuation over time at 400 mbar Nominal power Phase (Nominal voltage) Vacuum connection with small flange Measuring access port with small flange Compressed air connection for pressure-encapsulation Electrical data Dimensions and weights Interior volume Net weight of the...

Vacuum drying chambers | Series VD ORDERING INFORMATION Interior volume [L] Power supply - unit fuse Model version OPTIONS Designation Additional universal ventilation Additional universal connection for ventilation with ambient air or inert gas. Flow limiter thread (RP”), and connection with 3/8” male thread. for temperature and pressure values (output not adjustable) Calibration certificate, expanded for temperature; for extending the measurement in center of chamber to include another test temperature Calibration of the pressure display to a specified value, including certificate Extension...

Series VD | Vacuum drying chambers Interior lighting LED light strips on the left and right in the door Temperature measurement of the specimen with flexible Pt 100 sensor and digital specimen temperature display Touchscreen controller Large display panel with intuitive operation, actual and set values of main process parameters are shown simultaneously on the display. In addition, the graphic chronological evaluation of process parameters is displayed. Universal access port Additional DN 40 small flange universal access port with blind flange, for positioning sensors or supply lines in the chamber....

Pump chamber for installation of vacuum pumps, with switchable power socket. Including chemical membrane pump with a nominal air Pump chamber VD 56 with flow of 2.0 m3/hour, final pressure 7 mbar and connection kit VD VP1-vacuum pump VP1 VP2. Pump chamber for installation of vacuum pumps, with switchable Pump chamber VD 56 with power socket. Pump chamber VD 115 with vacuum pump VP1 Pump chamber for installation of vacuum pumps, with switchable power socket. Including chemical membrane pump with a nominal air flow of 2.0 m3/hour, final pressure 7 mbar and connection kit VD VP1-VP2. Pump chamber...

Series VD | Vacuum drying chambers SERVICES Designation The warranty is extended by 1 year from the delivery date, wear parts are excluded BRONZE 3-year maintenance contract Maintenance service as contractually agreed, visual inspection of mechanical and electrical components, check of control response, 20% discount on spare parts Calibration of one (1) test temperature specified by the user in center of chamber, including certificate Extension of calibration of one (1) additional test temperature specified by the user in the center of the usable space, including certificate Execution of IQ/OQ...

Series VDL | Vacuum drying chambers IMPORTANT CHARACTERISTICS BENEFITS Fast, gentle drying Optimum heat transfer through large thermal conducting plates Safe working thanks to ATEX-compliant safety concept Also option of modular complete system with vacuum pump and pump chamber Temperature range: +9°C above ambient temperature to +110 °C ATEX conformity for units: EX II 2/3/- G IIB T3 Gb/Gc/- X Intuitive touchscreen controller with graphical pressure and temperature display Program-controlled drying monitoring with automatic ventilation at end of process Internal data logger, measured values...