M8-D
M8-D
- Screw locking according to DIN EN 61076-2-114.
- 4 symmetric contacts with data transmission up to 100 Mbit/s.
- Field-wireable, moulded, straight, and angled panel mount connectors.
- Degree of protection: IP67 with 360-degree shielding.
- Cat5e compatibility for Ethernet applications and Profinet surroundings.
- 30% less installation space required compared to M12 connectors.
- Supports Power over Ethernet plus (PoE+) for future-proof networking.
- Standardized according to DIN EN 61076-2-114 for power supply and data transmission.
- Available in field-wireable, overmoulded, or panel mount versions.
- Gold-plated brass contacts with a rated voltage of 63 V DC and a rated current of 4 A.
- Field-wireable versions have two cable outlets (4-5.5 mm and 5-8 mm).
- Operating temperature range: -40°C to +80°C.
Catalog excerpts
SPECIALIST FOR CIRCULAR CONNECTORS M8 FOR SPACE SAVING INSTALLATIONS FEATURES Screw locking according to DIN EN 61076-2-114 4 contacts symmetric Data transmission up to 100 Mbit/s Field-wireable, moulded, straight and angled panel mount connectors Degree of protection IP67 As an alternative to M12, there are now also M8 connectors for data transmission in network cabling. 360 degree shielding Cat5e Data transmission and power supply 30 percent less installation space than M12 Ethernet applications, Profinet surroundings Future-proof network PoE+ M8 CONNECTORS WITH D-CODING M8 connectors require...
Open the catalog to page 2
SECTORS AND FIELDS OF APPLICATION M8-D circular connectors are needed to automate production plants, buildings or infrastructure facilities. They are used for data communication to allow controllers and production control computers or sensors and actuators to communicate with each other via protocols such as Ethernet/IP or Profinet. Other applications are for image processing systems, sensors, Ethernet switches and gateway devices. Automation technology Image processing systems Gateway devices Data communication Ethernet switches Sensor technology
Open the catalog to page 3
PRODUCT OVERVIEW M8 Automation Technology D-Coding 818 Series • Connectors with screw locking acc. to DIN EN 61076-2-114 • 4 contacts with symmetrical arrangement • Data transmission up to 100 Mbit/s • Degree of protection IP67 • CAT5e • 360 degree shielding Field-wireable, moulded, straight and angled panel mount connectors Ethernet applications, Profinet surroundings DIN EN 61076-2-114 30 percent less installation space than M12 Data transmission and power supply Future-proof network PoE+ CONTENTS Range Connectors for category 5 signal rates (CAT5) M8-D
Open the catalog to page 4
Male cable connector, screw clamp termination, iris type spring, shieldable Female cable connector, screw clamp termination, iris type spring, shieldable Female cable connector, screw clamp termination, iris type spring, shieldable Automation Technology Male panel mount connector, front fastened, dip solder, with shielding sheet Male angled panel mount connector, front fastened, dip solder, with shielding sheet Female panel mount connector, front fastened, dip solder, with shielding sheet Female angled panel mount connector, front fastened, dip solder, with shielding sheet Drilling scheme see...
Open the catalog to page 5
Cable length Cable length Cable length Male cable connector M8 x 1 – Female cable connector M8 x 1 Male cable connector M8 x 1 – Male cable connector M8 x 1 Female cable connector, moulded, Ethernet cable Male cable connector, moulded, Ethernet cable Automation Technology Automation Technology Cable length Specifications of cable Wire gauge mm2 1) Material jacket Insulation wire Design of wire (mm) Cable jacket Ø (mm) Resistance of wire Temperature range (cable in move) Temperature range (static cable) Bending radius (cable in move) Bending radius (static cable) Bending cycles (at 10 x D) Permitted...
Open the catalog to page 6
Assembly instruction Contact arrangements Cable connectors, shieldable, screw clamp connection, iris type spring Shielding braid diameter > 3,5 mm 1. Bead pre-assembled housing to cable (consisting of: assembled sleeve, seal and pressing screw). 2. Dismantle cable, strip single wires, shorten shielding braid. (Wrap with copper tape if necessary) 3. Screw on single wires. 4. Screw sleeve to male/female insert. 5. Tighten pressing screw. Automation Technology M8-D Female insert (mating side) Male insert (mating side) Shield-diameter > 3,5 mm female insert, assembled yellow white orange blue sleeve,...
Open the catalog to page 8
Protection cap for male panel mount connector Accessories Automation Technology Protection cap for male panel mount connector, front fastened Protection cap for female panel mount connector Protection cap for female panel mount connector, front fastened Protection cap for female connectors Ø 9,2 7,5 Mounting tool for M8 locking ring, 0.4 Nm
Open the catalog to page 9
PICTURES: SHUTTERSTOCK, FOTOLIA, ISTOCK, STEFFEN WALTER STUDIOS
Open the catalog to page 10
Franz Binder GmbH & Co. Elektrische Bauelemente KG [email protected] www.binder-connector.de Specifications may be changed without notice, errors excepted. AGB: www.binder-connector.com/en/terms
Open the catalog to page 11All Binder USA catalogs and technical brochures
DATA TRANSMISSION61 Pages
SENSORS & ACTUATORS109 Pages
POWER38 Pages
INDUSTRY MINIATURE75 Pages
SUBMINIATURE37 Pages
Snap-in Safety Clip4 Pages
M12 X-Coding2 Pages
HEC13 Pages
M8·M128 Pages
M59 Pages
CORE PROGRAM236 Pages
PRODUCT PORTFOLIO15 Pages
PLUG & PLAY7 Pages
Subminiature connectors3 Pages
Miniature connectors3 Pages
