HEC
13Pages

For the harshest environmental conditions

SPECIALIST FOR CIRCULAR CONNECTORS HEC HARSH ENVIRONMENT CONNECTOR Designed for use in the harshest environments and outdoor environments, such as extreme weather conditions, extreme temperatures, dust, humidity, liquids or vibrations. The HEC series is part of our extensive range of power connectors, making it suitable for virtually any low and high voltage application. This enables versatility, which is also reflected in the possible areas of application. These include agricultural and construction machinery, chemical plants/process engineering, mining and surface mining, mechanical...

SECTORS AND FIELDS OF APPLICATION Mining and surface mining Chemical and process engineering Non-contact food industry Agricultural and construction machinery Mechanical engineering and materials handling

PRODUCT OVERVIEW Power Bayonet HEC · 696 Series • Bayonet locking system • 5, 8 and 12 contacts • Degree of protection IP68 / IP69K • Crimp termination • Diameter cable connectors 36 mm, Panel mount connectors 40 x 40 mm • Protective hose fitting • Panel mount connectors with hinged cover • Sealing Kit • VDE-, UL-approval • Designed for harsh environments Compact design: Power supply for your system or drive unit even in confined spaces. Hybrid design for simultaneous power supply and signal transmission with only one plug-in. Good chemical and corrosion resistance for use in the...

Male cable connector Male cable connector, protective hose fitting Female cable connector Female cable connector, protective hose fitting Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Cable outlet Cable outlet Cable outlet Cable outlet Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage categorie Material group...

Male panel mount connector Male panel mount connector, protective hose fitting Female panel mount connector Female panel mount connector, protective hose fitting Female panel mount connector, hinged cover Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Crimp and strip contacts see page 17/18 Flat seal enclosed loose Number of contacts Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated...

Assembly instruction Assembly instruction Cable connectors 5 and 8 contacts Cable connectors 12 contacts 1. Strip to L = X mm length and take off cable jacket. 2. Bead pressing screw, pinch ring, seal and distance sleeve to cable. 3. Strip insulation of the single wires (length Y mm). 4. Crimp contacts to single wires.* 5. Press crimped contacts into contact carrier until they snap into place. Then push the carrier into the connector sleeve to block. 6. Put locking unit to the thread of the connector sleeve and screw it towards the direction marked with an arrow until it is tight. 7. Push...

Assembly instruction Panel mount connectors 5 and 8 contacts 1. Strip single wires to L = 7 mm. 2. Crimp contacts to wires.* 3. Press crimped contacts into contact carrier until they snap into place. 3.1. Alternatively when using the single wire seal: ** Pierce through the needed sections of the single wire sealings with a pointed device or tool and then raise them over the contacts. Then press contacts into the contact carrier, lay the single wire sealings flat onto the contact carrier, press pressure ring to stop and finally fix it with the pressing screw. 4. Push the pressing screw over...

Component part drawing flat seal female housing male housing Male contact, power, PU 100 pieces, for 4+PE version Wire gauge male insert option with set of sealings Panel mount connectors Male contact, power, PU 100 pieces, for 4 + 3+PE version Female insert (mating side) Male insert (mating side) Contact arrangements 1 Male contact, signal, PU 100 pieces, for 4 + 3+PE version 25 Female contact, power, PU 100 pieces, for 4 + 3+PE version Female contact, power, PU 100 pieces, for 4+PE version Female contact, signal, PU 100 pieces, for 4 + 3+PE version Alternative with flattening

Single contact (Male), PU 50 pieces, for 12 pole version Single contact (Female), PU 50 pieces, for 12 pole version Accessories Power Crimping tool for turned crimp contacts Crimping tool for stamped single contacts 20,5 Crimp measures, hight dimension (standard value) Crimp measures, hight dimension (standard value) Crimping tool for strip contacts Specifications Wire gauge mm2 Conductor cross section mm2 Insulation Ø Crimp measures (standard value) Crimp extraction force acc. to DIN EN 60352-2 Strip contact (Male), for 12 pole version Extraction tool for turned contacts Strip contact...

Accessories Power Accessories Power without thrust ring pressing screw thrust ring Protective hose fitting for panel mount connectors securing clip with thrust ring seal for single wires with thrust ring without thrust ring with thrust ring Specifications of cable Wire gauge mm2 1) Material jacket Insulation wire Design of wire (mm) Cable jacket Ø (mm) Resistance of wire Temp. range (cable in move) Temp. range (cable fixed) Bending radius (cable in move) Bending radius (cable fixed) Approval thrust ring Seal for single wires, thrust ring, pressing screw, securing clip and hose seal are...

PICTURES: SHUTTERSTOCK, FOTOLIA, ISTOCK, STEFFEN WALTER STUDIOS For the harshest environmental conditions

Franz Binder GmbH & Co. Elektrische Bauelemente KG vk@binder-connector.de www.binder-connector.de Specifications may be changed without notice, errors excepted. AGB: www.binder-connector.com/en/terms