conventional screening technology Resonance-, Linear-, Circular Vibratory Screens Processing Technology

RESONANCE VIBRATORY SCREENS Resonance vibratory screens are ideally suited to applications requiring screening of processed materials to the highest quality with screens from the very fine, up to 70 mm, particularly for dry and wet screening of round, angular, cubic or flaky materials without blinding. High separating efficiency is provided by a horizontally arranged screen with up to separate 6 screened fractions being achieved on a single machine. Due to the low dynamic forces generated during screening, only lightweight support structures of low height are required, giving additional cost...

LINEAR VIBRATORY SCREENS Binder Linear Vibratory Screens operate horizontally or at very low angles of declination and consequently provide high quality separation of processed material fractions. Ideally suitable for fine, medium and coarse screening up to approximately 200 mm of round, angular, cubic or flaky material. Efficient screening applications range from dry or damp material to wet draining processes. Extensive experience in providing efficient screening systems within industrial plants and guaranteed tonnages up to 1500 t/hour continuous operation with minimal screen wear, enable Binder+Co...

LINEAR VIBRATORY SCREENS Drive is achieved by electric motor with cardan shaft to the drive shaft equipped with twin unbalance, adjustable weights. Where required additional v-belt drive can be provided. The number of exciters is increased according to screen width and two models are available with the exciters arranged above the screen or below, depending on application. Each unit is mounted on hollow, reinforced rubber springs which reduce noise levels, reduce dynamic forces, have optimal expansion and contraction properties without the need for bump stops and dispense with the need of a counterswing...

CIRCULAR VIBRATORY SCREENS Binder Circular Vibratory Screens are particularly suited to the efficient screening of materials with a tendency to combine and stick. The circular motion provides moments of momentum which maintains the ejection principle and efficient screening. The Circular vibratory screens are primarily installed as pre-separators for intermediate and finished products. Their application is classical dry or wet screening of medium to coarse fractions up to approx 150 mm. The speed and amplitude of vibration are adjustable to suit the processed fraction and ensure that the circular...

PERFORMANCE RESONANCE VIBRATORY SCREENS Binder Resonance Vibratory Screens are available as single or double deck screens for throughputs up to 400 t/h and fraction sizes up to 350 mm. Screened fractions of 0.5 mm to 70 mm are available. LINEAR VIBRATORY SCREENS Binder Linear Vibratory Screens process fractions up to 1200 mm with screened fractions of 0.5 mm to 200 mm. They are available as single deck, double deck or 2 1⁄2 deck systems. CIRCULAR VIBRATORY SCREENS Binder Circular Vibratory Screens process fractions up to 1500 mm with throughputs up to 1500 t/h. Screened fraction sizes of 1 mm...

Processing Technology Environmental Technology Bagging Technology Binder+Co AG, Grazer Strasse 19-25, A-8200 Gleisdorf, Austria Tel.: +43-3112-800-0*, Fax: +43-3112-800-398 e-mail: [email protected] www.binder-co.com With 50 years experience in screening technology, Binder+Co is able to assess each application, with every installation being tailored to suit the clients specific requirements to ensure the most efficient screening system is provided. Linear and vibratory screens are of fully bolted construction to avoid fractures and ensure a maximum life cycle. Double deck units are provided with...