Quick-Lift Arm QLA 50i OVERHEAD MOUNTED

Product catalog summary

Overview
The QLA 50i Overhead Mounted Quick-Lift Arm is an intelligent lifting device designed to meet high standards of ergonomics, safety, and efficiency. It features a unique integrated mechanical, electric, and pneumatic swivel that simplifies use and minimizes maintenance. The device is highly responsive and maintains exceptional safety through intelligent control systems, offering the best auto balance regardless of load weight. It is also noted for its high reliability and low power consumption, contributing to superior cost efficiency.

Technical Specifications

Lifting Capacity: Maximum 50 kg.
Working Area: Maximum recommended working radius R1 = L1 - 300 mm; minimum recommended working radius R2 is provided in a chart.
Stroke Length: 2.7 meters.
Lift Motor: Stepless servo-controlled asynchronous motor.
Power Supply: 230V, 50-60 Hz, 1-phase with ground protection, 10A.
Hinged Arm: Made from Ultra High Strength Steel (UHSS) with a standard length of 3 meters.
Attachment: Designed with a flange for mounting to an overhead steel structure.
Manoeuvring: Operated with Binar Handling’s patented control handle, requiring minimal force for up/down motion.
End Effector: Customizable to fit customer needs with intelligent I/O signals for optimal functionality.

Options

Middle link of 200 mm for a triple hinged arm (does not increase maximum working radius).
Pneumatic parking brake for the arm, activated via a manual push button on the control handle.
Note: Middle link and pneumatic parking brake cannot be combined.

Additional Information
The control handle must be ordered separately. Technical requirements for the overhead steel structure, including ultimate loads and maximum permitted deflections, are available upon request. Binar Handling AB reserves the right to make changes and disclaims responsibility for any errors or incomplete information.

Contact Information
Binar Handling AB, Hedekullevägen 24, SE-461 38 TROLLHÄTTAN, Sweden. Telephone: +46 (0)520 47 40 00, Email: [email protected], Website: www.binarhandling.com

Catalog excerpts

Quick-Lift Arm QLA 50i OVERHEAD MOUNTED-1

Quick-Lift Arm QLA 50i OVERHEAD MOUNTED Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety and efficiency. Unique integrated mechanical, electric, pneumatic swivel simplifies use and minimizes maintenance. Easy to use thanks to outstanding responsiveness, regardless of load weight. Exceptional safety achieved using our intelligent control systems. The best auto balance available regardless of load weight. High reliability and low power consumption results in superior cost efficiency.

Open the catalog to page 1

Quick-Lift Arm QLA 50i OVERHEAD MOUNTED-2

OVERHEAD MOUNTED TECHNICAL DATA QLA 50i OVERHEAD MOUNTED Max 50 kg. Max recommended working radius R1 = L 1 - 300 mm. Min recommended working radius R2 = See chart. Lift motor Stepless servo-controlled asynchronous motor. Power supply 230V, 50-60 Hz, 1-phase with ground protection, 10A. Hinged arm Arm profiles in Ultra High Strength Steel (UHSS). Recommended working area 360° Attachment The arm is designed with a flange that is to be mounted to a mating flange in the overhead steel structure. Manoeuvring Manoeuvring is done with Binar Handling’s patented control handle. Only a small force is...

Open the catalog to page 2

All Binar Handling AB catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list