video corpo

TRD BTP (Bench Top Press) Series - 10 Pages

Add to MyDirectIndustry favorites
TRD BTP (Bench Top Press) Series

Catalog excerpts

Bench Top Press Page 217 Press Cylinders Page 220 95% OF OUR CYLINDERS SHIP IN 2-3 DAYS! tBLE ON ALL CATALOGED CYLINDER MODELS!

 Open the catalog to page 1

FOR SINGLE PISTON ROD, 5.00” BORE, MF1 MOUNT CYLINDERS FOR ‘TRA’ TRIPLE PISTON ROD, 5.00” BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00” Bore three (3) Stage Multi-Stage Cylinder and Micro-Adjust precision stroke adjustment Heavy Duty Bench Top Press shown with 5.00” Bore Single-Stage Triple Rod Cylinder and Tooling Plate Technical Data Press Frame Cyl. Dimensions Press Frame Cylinders HEAVY DUTY BENCH TOP PRESS Heavy Duty Bench Top Press Features • Heavy duty STEEL keyed & bolted construction. • Adjustable work heights - Choose from three different built-in height...

 Open the catalog to page 2

BENCH TOP PRESS FRAME 5.00” BORE CYLINDER 501 MOUNTING (SINGLE STAGE OR MULTI-STAGE) 5.00” BORE TRIPLE ROD 502 CYLINDER MOUNTING FULLY ASSEMBLED (PRESS & CYL.) NON-ROTATING EXTERNAL NRE (SPECIFY CYL. STROKE & ROD DIA.) U UNASSEMBLED UNIT ORDER CYLINDER SEPARATELY PRESS FRAME WIDTH (ASSEMBLED) TOOL PLATE Press Frame Cyl. Dimensions Press Frame Cylinders 15.0 (4) 5/16-18 TAPPED HOLES (2) EACH SIDE 12.0 (4) .375-24 X .50 DEEP TAPPED HOLES (2) .3755 X .50 DEEP REAMED HOLES .3760 TOOL PLATE DETAIL (BOTTOM SIDE) 1 ∆ Dimension reflects the press top plate mounted in the bottom PLATEN PLATE DETAIL...

 Open the catalog to page 3

CYLINDER SELECTION FORCE CHART EXTEND FORCE ROD DIA. EFFECTIVE AREA EXTENDING TECHNICAL DATA SINGLE STAGE 9223 10145 PLATEN PLATE DEFLECTION Press Frame Cyl. Dimensions Press Frame Cylinders EFFECTIVE AREA EXTENDING SINGLE STAGE (OR MULTI-STAGE) PRESS FRAME DEFLECTION CHARTS 1,000 DEFLECTION (INCHES) PLATEN PLATE DEFLECTION .016 DEFLECTION (INCHES) FORCE (lbs) “C” FRAME DEFLECTION Technical Data PRESS FRAME CYLINDER SPEED CHART .014 NOTES: DEFLECTION (INCHES) • Cylinder cycle rates can vary depending on air valve sizes, airline diameter and .006 length, type of fitting, and if quick exhaust...

 Open the catalog to page 4

Choose from Single Stage, Multi-Stage, Triple-Rod (Non-Rotating with Tool Plate) or Triple-Rod Multi-Stage Press Cylinders. Double rod end styles are available on all models. • SINGLE STAGE: Basic single bore, double acting cylinder. • TRIPLE ROD: A cylinder with three piston rods and a tooling plate as standard features. The 5.00” square tooling plate distributes the cylinder force over a large work area. Standard features also include four (4) .500-20 UNF tapped holes in the tooling plate that can be used to mount customer fixtures or tooling. Triple rod cylinders can be ordered as a...

 Open the catalog to page 5

MSEP - MX3 NFPA MOUNT SERIES MSEP 125 PSI AIR MSEP/ or HYDRAULIC, NONMSRP SHOCK (HIGH FORCE EXTEND AND RETRACT) SINGLE ROD (LEAVE BLANK) D = DOUBLE ROD END (REQUIRED FOR “MA” OPTION Press Frame Cylinders Press Frame Cyl. Dimensions Page 189 FEMALE ROD THREAD (LEAVE BLANK) FULL DIAMETER MALE ROD THREAD NON-CUSHION (LEAVE BLANK) LARGE MALE ROD THREAD SMALL MALE ROD THREAD .25” URETHANE BUMPER HEAD ONLY KK3S STUDDED PISTON ROD (WITH KK3) .25” URETHANE BUMPER BOTH ENDS .25” URETHANE BUMPER CAP ONLY MPR* MAGNETIC PISTON FOR SWITCHES MS OPTIONAL PORT LOCATION EXTENDED PISTON ROD THREAD (SPECIFY)...

 Open the catalog to page 6

NRE External Non-Rotating The External Non-Rotating option prevents the piston rod (and any attached tooling) from rotating as the cylinder cycles. Consult factory for details. llows precision adjustment of cylinder extend stroke A asy to read precision scale (.001” calibration) E nclosed, no pinch point design E vailable on all cylinder models with “D” A Double Rod End option • p to 12” stroke* and adjustment over full U range of stroke Press Frame Cyl. Dimensions Press Frame Cylinders For high torsional load applications, cylinder can be equipped with a twin guide rod internally (“NR”...

 Open the catalog to page 7

PRESS FRAME CYLINDER: Press Frame Cyl. Dimensions Press Frame Cylinders MIDDLE BOTTOM Technical Data

 Open the catalog to page 8

PRESS FRAME CYLINDER: Press Frame Cyl. Dimensions Press Frame Cylinders MIDDLE BOTTOM Technical Data

 Open the catalog to page 9

PRESS FRAME CYLINDER: MSEP 5S (5 STAGE): Press Frame Cyl. Dimensions Press Frame Cylinders Technical Data 3.32 SQ. (4) .50-20 X 1 DEEP TAPPED HOLES TOOLING PLATE DETAIL

 Open the catalog to page 10

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. Pinch Valves

    46 Pages

  3. 500 series

    6 Pages

  4. PIV

    2 Pages

  5. SWITCHES

    44 Pages

  6. TRD Full Line

    304 Pages

  7. IntelliSense®

    24 Pages

  8. Pinch Valves

    40 Pages

  9. NPT Gauges

    2 Pages

  10. Grippers

    8 Pages

  11. EdgeSwitch

    2 Pages

  12. Air Presses

    2 Pages

  13. Valves

    76 Pages

  14. Flat Cylinders

    130 Pages

Archived catalogs