video corpo

Switch products - 36 Pages

Add to MyDirectIndustry favorites
Switch products

Catalog excerpts

Switch Products • Switch and Cable Selection Chart 9.3 • Switch and Cable Specifications 9.4 • Band Mounted Solid State Switches 9.5-9.6 • Heavy Duty Band Mounted Switches 9.7-9.10 • High Illumination and High 9.11-9.13 Power Band Mounted Switches • Track Mounted Solid State Switches 9.14-9.15 • Mini Round Track Mounted Switches 9.16-9.17 • Heavy Duty Track Mounted Switches 9.18-9.19 • 5mm Square Track Mounted Switches 9.20-9.23 • Ultran End of Stroke Switches 9.24-9.25 • M8 Female Quick Connect Cables 9.26-9.27 • Switch Application Information

 Open the catalog to page 1

Switch Products Bimba Switch Products Bimba offers pre-tested Switches for Bimba actuators. Our solutions provide a cost effective interface between the pneumatic actuators and electrical control systems. Our pre-tested solutions also eliminate costly, time-consuming design and fabrication required if switches are purchased separately and provide an aesthetically pleasing installation. In this catalog section you will find both traditional Bimba switches as well as newer generations of Bimba switches to allow for maximum flexibility to fit your application. The switches perform the same...

 Open the catalog to page 2

Bimba Switch Products EF/Twist Clamp Original Line Track Mounted Base Part Number General Description Original Line with Rod Lock Pneu Turn Linear Thruster Ultran Slide High Load Ultran Stopper/ LPA/NPA Repairable Stainless Steel All Stainless OL Ultran Band EdgeSwitch™, 4mm round, LED Mini EdgeSwitch™, PNP, 4mm round, LED Mini EdgeSwitch™, NPN, 4mm round, LED Mini EdgeSwitch™, 4mm round, LED Reed, 2 wire, No LED Reed, 2 wire, No LED Triac, 2 wire, No LED 1.5 amp, AC only Triac, 2 wire, No LED, 1.5 amp, AC only Reed, Square slot, LED Reed, Square slot, LED Reed, 2 wire, No LED, 3 watts...

 Open the catalog to page 3

Bimba Switch Products Switch and Cable Specifications Switch Type Base Part Number General Description Sensor Type Track Mounted PNP or NPN, 4mm round, LED PNP, 4mm round, LED NPN, 4mm round, LED EdgeSwitch™, 2-wire, Solid-state Mini EdgeSwitch™, PNP, 4mm round, LED Mini EdgeSwitch™, NPN, 4mm round, LED Mini EdgeSwitch™, 4mm round, LED Triac, 2 wire, No LED 1.5 amp, AC only Triac, 2 wire, No LED, 1.5 amp, AC only Reed Reed HSC-AB HSK-AB PNP, Square slot, LED NPN, Square slot, LED Band Mounted Reed, Square slot, LED Reed, Square slot, LED PNP, Square slot, LED NPN, Square slot, LED PNP, LED...

 Open the catalog to page 4

Bimba Switch Products Switch and Cable Selection Chart Switch Selection Band Mounted Solid State Switches HSC and HSK Switch and Cable Specifications Compatible and Tested for use with: Original Line Cylinders, Pneu-Turn Rotary Actuators, and Linear Thrusters Band Mounted Solid State Switches Heavy Duty Band Mounted Switches High Illumination and High Power Band List Price Sourcing Switch (PNP), LED, 30VDC, 150mA with 24" Pigtail Leads, No Band Sourcing Switch (PNP), LED, 30VDC, 150mA with 24" Pigtail Leads, Band Included Sourcing Switch (PNP), LED, 30VDC, 150mA with M8 Male Connector, No...

 Open the catalog to page 5

Bimba Switch Products Band Mounted Solid State Switches HALL EFFECT HSCQ, HSKQ Wiring Diagrams Typical Solid State Sourcing Configuration Typical Solid State Sinking Configuration Basic Circuit Layout for Programmable Logic Controllers (PLC) and Normally Off Relays and Solenoids CAUTION: Shorting black wire to ground will damage switch BLUE ^Common Basic Circuit Layout for Programmable Logic Controllers (PLC) and Normally Off Relays and Solenoids CAUTION: Shorting black wire to supply voltage will damge switch Sourcing Solid State Switch Sinking Solid State Switch Pin and Wire Assignments...

 Open the catalog to page 6

Bimba Switch Products Heavy Duty Band Mounted Switches List Price Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, No Band Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, Band Included Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, 2m Mating Cable, No Band Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, 2m Mating Cable, Band Included Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, 5m Mating Cable, No Band Reed Switch, 2 wire, No LED, 120 V, 500mA, M8 Male Connector, 5m Mating Cable, Band Included Reed Switch, 2 wire, No...

 Open the catalog to page 7

Bimba Switch Products Heavy Duty Band Mounted Switches MRS-.087-B, MRS-.087-PB, and MRS-1.5-B 24" (0.6m) JACKETED LEADS 144" (3.66m) OPTIONAL L.E.D.* *NOTE: Only "BL" models include L.E.D. NEGATIVE/ NEUTRAL NEGATIVE/ NEUTRAL Pin and Wire Assignments for Quick Connect Switch “Q” Option Male Connector C4 and C5 Cable Female Connector Face View of M8 Male Connector Side View of M8 Female Connector 1. POSITIVE / HOT 3. NEGATIVE / NEUTRAL 4. OUTPUT NOT CONNECTED FOR 2 WIRE SWITCH MODELS Face View of M8 Female Connector

 Open the catalog to page 8

Bimba Switch Products Switch and Cable Selection Chart Switch Selection Switch and Cable Specifications Heavy Duty Band Mounted Switches MRS-.027-B, MRS-.027-BL Compatible and Tested for use with: ISO 6432 Cylinders Band Mounted Solid State Switches Heavy Duty Band Mounted Switches Part Number List Price Reed Switch, 2 wire, No LED, 28 V AC/DC max., 250mA, 0.6m Pigtail Leads, Band Included Reed Switch, 2 wire, No LED, 28 V AC/DC max., 250mA, 3.6m Pigtail Leads, No Band Reed Switch, 2 wire, No LED, 28 V AC/DC max., 250mA, 3.6m Pigtail Leads, Band Included Reed Switch, 2 wire, No LED, 28 V...

 Open the catalog to page 9

Bimba Switch Products Heavy Duty Band Mounted Switches MRS-.027-B, MRS-.027-BL MAGNETIC REED SWITCH LED INDICATOR: A 'L' in the model number signifies the presence of a LED indicator. CABLE LENGTH: The standard cable length is 0.6m. Switches with a 'X' in the model number indicate a cable length of 3.6m. WHITE BLACK 3 wire models, with LED Pin and Wire Assignments for Quick Connect OUTPUT (PIN 4) NEGATIVE (PIN 3) BROWN - POSITIVE (PIN 1) BLUE - NEGATIVE (PIN 3) Note: Terminal 4 is not connected for 2 wire switch models. 8mm Female Connector

 Open the catalog to page 10

Bimba Switch Products Switch and Cable Selection Chart Switch Selection High Illumination and High Power Band Mounted Switches MSS, R10, R10P, RAC Switch and Cable Specifications Compatible and Tested for use with: Original Line Cylinders, All Stainless Original Line Cylinders, Pneu-Turn Rotary Actuators, Linear Thrusters, and Repairable Stainless Steel Cylinders Band Mounted Solid State Switches Heavy Duty Band Mounted Switches High Illumination and High Power Band Part Numbers and List Prices Description List Price Sourcing or Sinking Switch, 2 wire, High Illumination Body, 24 VDC, 300mA,...

 Open the catalog to page 11

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. NFPA Actuators

    2 Pages

  3. Air Reservoir

    5 Pages

  4. Pinch Valves

    46 Pages

  5. 500 series

    6 Pages

  6. PIV

    2 Pages

  7. SWITCHES

    44 Pages

  8. TRD Full Line

    304 Pages

  9. TRD Accessories

    13 Pages

  10. Electric Motion

    16 Pages

  11. IntelliSense®

    24 Pages

  12. Pinch Valves

    40 Pages

  13. NPT Gauges

    2 Pages

  14. Grippers

    8 Pages

  15. EdgeSwitch

    2 Pages

  16. Air Presses

    2 Pages

  17. Air Reservoirs

    2 Pages

  18. Valves

    76 Pages

  19. Air Preparation

    16 Pages

  20. Flat Cylinders

    130 Pages

  21. ISO Cylinders

    27 Pages

  22. Related Products

    39 Pages

  23. Switch Products

    34 Pages

Archived catalogs

  1. IntelliSense®

    4 Pages