video corpo

Original Line Electric® - 57 Pages

Add to MyDirectIndustry favorites
Original Line Electric®

Catalog excerpts

Original Line Electric® Electric motion control solutions for extreme precision and customized performance

 Open the catalog to page 1

cast housing High torque step motor Low friction self lubricating nut High load bronze rod bearing High flux piston magnet High load stainless steel square rod Reverse parallel motor pulleys Self-aligning low friction wear strip Special high torque clamping coupler Dual angular load bearing High speed precision screw Stainless steel foot mount brackets Original Line Electric® (OLE) actuators are alternatives to pneumatics where plant air quality, compressor availability, portability, and precise control and positioning are needed. The model above is OLE-3508-20S-P3W; 350 series, 8 inch...

 Open the catalog to page 2

Bimba’s Original Line Electric Actuators are designed, built, and tested to provide the longest life, greatest durability, highest speed, and greatest thrust per dollar. They are ideal for applications requiring greater control for enhanced flexibility. OLE actuators can adapt to applications that utilize our Original Line pneumatic cylinders, and are available without motors (sized for steppers or servos), with integral DC stepper motors, AC stepper motors, integrated motors, and also with matching AC and DC drives. Many popular standard features and options are available. If you need a...

 Open the catalog to page 3

Bimba Original Line Electric® Actuators The model number of all Original Line Electric Actuators consists of alphanumeric clusters designating product Type, body size (number designates maximum thrust capacity in pounds), stroke length, lead, mounting style, motor Type and configuration, and options. The example below describes OLE-7512.12-50BF-T1Y2, a 75 pound maximum thrust model with 1.5 inch diameter body, 12.12 inch stroke, 0.50 inch lead, block front mount, switch track, 23 frame stepper motor with Encoder, and drive. Piston magnets are included. 4Adapter D-109957 is required for...

 Open the catalog to page 4

Incompatible Options - the following options cannot be ordered together.

 Open the catalog to page 5

Bimba Original Line Electric® Actuators Part Number Part Number Adapter Plate MF1 Mounting Flange (Allows OLE to front mount to Rod Clevis    standard NFPA MF1 dimensions.) Part Number Part Number Part Number OLE actuators are designed for 1500 miles life at continuous duty, 23° C (73° F), clean dry ambient, and 15% below the published speed/thrust curve. Higher ambient temperatures, higher speeds, higher loads, and the presence of moisture and contaminants will cause accelerated wear. The actual life of the actuator in an application is dependent upon all these factors which must be...

 Open the catalog to page 6

Note: Torque values in "oz-in" are peak torque values. Inventory items noted in BLUE *Coming Soon

 Open the catalog to page 7

Inventory items noted in BLUE *Coming Soon

 Open the catalog to page 8

DC Programmable Stepper Drives Inventory items noted in BLUE.

 Open the catalog to page 9

Inventory items noted in BLUE.

 Open the catalog to page 10

'Self-locking threads 2Inches per revolution of screw 3Amount of end play on screw. Low backlash designs are available. Contact Technical Support. 4Inertia is given per inch of stroke Caution! When specifying actuator stroke before ordering, always add at least 1/8 inch to the full stroke required in your application. The actuator should not reach mechanical end of stroke during extend or retract. Repeatedly reaching mechanical end of stroke, especially under load at operating speeds, may damage the actuator. Sizing your actuator and specifying the right motor The following procedure is for...

 Open the catalog to page 11

Bimba Original Line Electric Actuators Bimba Original Line Electric® Actuators Thrust vs. Torque Speed Versus Thrust 75 75 Speed versus Thrust, No Motor Speed versus Thrust, No Motor OLE-75 Thrust versus Torque OLE-75 Thrust versus Torque 80 .125" Lead .500" Lead .750" Lead OLE-150 Thrust versus Torque OLE-150 Thrustversus Torque Motor Torque (oz-in) 350 Speed versus Thrust, No Motor 350 Speed versus Thrust, No Motor OLE-350 Thrust versus Torque OLE-350 Thrust versus Torque 350 Motor Torque(oz-in) 150 Speed versus Thrust, No Motor 150 Speed versus Thrust, No Motor Torque (oz-in) The curves...

 Open the catalog to page 12

Bimba Original Line Electric® Actuators Bimba Original Line Electric Actuators Actual Speed versus Motor RPM RPM Actuator Speed versus Self-lockingleads Self-locking Leads Actuator Speed (inches/second) Actual Speed versus Motor RPM RPM Actuator Speed versus 6000 0.25 Lead 0.5 Lead 5000 Actuator Speed (inches/second)

 Open the catalog to page 13

Actuator Specifications Base Part Number Motor Specifications Base Part Number Operating temperature range: 32° F to 122° F (0° C to 50° C) limited by the drive. If the drive is remotely mounted and protected from heat, maximum operating temperature will be 160° F (71° C). Maximum stroke: 18 inches RoHS compliant 'Self-locking threads 2Inches per revolution of screw 3Amount of end play on screw Inertia is given per inch of stroke 5Inertia for motor by itself 6For drive sizing for actuators supplied without drives Caution! When specifying actuator stroke before ordering, always add at least...

 Open the catalog to page 14

Bimba Original Line Electric® Actuators Specifications and Sizing Step Motor and Motor/Drive Options (P1, E1, Y1, Z1) Speed/Thrust Performance Vertical Orientation*, Pounds and Inches/Second Maximum Continuous OLE-75 with MTR-DC17T-275 at 48 VDC * Vertical orientation is worse-case. These values are thrust values and in a horizontal orientation will result in moving loads above the thrust values indicated in the graphs. ** Original OLE-75 with P2 motor performance graph.

 Open the catalog to page 15

Bimba Original Line Electric® Actuators Specifications and Sizing Step Motor and Motor/Drive Options (P2, P8, E2, E8, Y2, Z2) Speed/Thrust Performance Vertical Orientation*, Pounds and Inches/Second Maximum Continuous OLE-150 with MTR-DC23T-601 at 48 VDC * Vertical orientation is worse-case. These values are thrust values and in a horizontal orientation will result in moving loads above the thrust values indicated in the graphs.

 Open the catalog to page 16

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. Pinch Valves

    46 Pages

  3. 500 series

    6 Pages

  4. PIV

    2 Pages

  5. SWITCHES

    44 Pages

  6. TRD Full Line

    304 Pages

  7. IntelliSense®

    24 Pages

  8. Pinch Valves

    40 Pages

  9. NPT Gauges

    2 Pages

  10. Grippers

    8 Pages

  11. EdgeSwitch

    2 Pages

  12. Air Presses

    2 Pages

  13. Valves

    76 Pages

  14. Flat Cylinders

    130 Pages

Archived catalogs