video corpo

ORIGINAL LINE ELECTRIC ® ACTUATORS - 26 Pages

Add to MyDirectIndustry favorites
ORIGINAL LINE ELECTRIC ® ACTUATORS

Catalog excerpts

Product Features Bimba Original Line Electric® actuators provide the greatest feature set, versatility, and performance at a price you can afford. High torque stepper motor cast housing Low friction self lubricating nut High load bronze rod bearing High flux piston magnet Aluminum rod guide High load stainless steel square rod Reverse parallel motor pulleys Self-aligning low friction wear strip High speed precision screw ORIGINAL LINE ELECTRIC ® ACTUATORS COLLABORATIVE ROBOT VACUUM TOOL Stainless steel die Special high torque clamping coupler Dual angular load bearing Stainless steel foot mount brackets 12 Original Line Electric® (OLE) actuators are alternatives to pneumatics where plant air quality, compressor availability, portability, and precise control and positioning are needed. The model above is OLE-3508-20S-P3W; 350 series, 8 inch stroke, reverse parallel motor mount, 0.20 inch lead. The self locking thread holds the rod in position, even with no power to the motor. Using a 34-frame stepper, the actuator is capable of about 350 pounds thrust at 1 inch/second, or 50 pounds at about 6 inches/second. Two other leads enable speeds up to 24 inches/second. Modular design Special screws Special composite nuts Special custom motor couplers Reverse parallel motor mount Square rod Massive bronze rod bearing and low friction piston wear strip Dual angular load bearing Order exactly what you need: actuator, motor, and drive, actuator and motor, or actuator only High speeds, high precision, and enables longer standard strokes High efficiency, high load capacity, high speed, and low noise High torque and moment load capacity, corrects axial misalignment of the screw and motor shaft Allows rear pivot or clevis mount and saves space Prevents rotation and with the bronze rod bearing, provides high durability and side load capacity Provides side load capacity Absorbs axial loads to protect the motor

 Open the catalog to page 1

ORIGINAL LINE ELECTRIC® ACTUATORS 13 Bimba’s Original Line Electric® Actuators are designed, built, and tested to provide the longest life, greatest durability, highest speed, and greatest thrust per dollar. They are ideal for applications requiring greater control for enhanced flexibility. OLE actuators can adapt to applications that utilize our Original Line pneumatic cylinders, and are available without motors (sized for steppers or servos), with integral DC stepper motors, AC stepper motors, integrated motors, and also with matching AC and DC drives. Many popular standard features and...

 Open the catalog to page 2

How It Works Application Ideas Pick & Place Sorting Gating Loading Lifting Stacking Insertion Dispensing Clamping Parts Transfer Valve Control COLLABORATIVE ROBOT VACUUM TOOL Target Applications Bimba’s Original Line Electric® (OLE) Actuators are designed, built, and tested to provide the longest life, greatest durability, highest speed, and greatest thrust per dollar. They are ideal for applications requiring greater control for enhanced flexibility. OLE actuators can adapt to applications that utilize our Original Line® (OL) pneumatic cylinders, and are available without motors (sized for...

 Open the catalog to page 3

ORIGINAL LINE ELECTRIC® ACTUATORS 15 How To SpecifySpecifications and Sizing No Motor Option (N) Operating temperature range: -20° F to 160° F (-29° C to 71° C) Standard IP rating: None Maximum stroke: 18 inches RoHS compliant 1 Self-locking threads 2 Inches per revolution of screw 3 Amount of end play on screw. Low backlash designs are available. Contact Technical Support. 4 Inertia is given per inch of stroke Caution! When specifying actuator stroke before ordering, always add at least 1/8 inch to the full stroke required in your application. The actuator should not reach mechanical end...

 Open the catalog to page 4

Speed Versus Thrust How To SpecifyThrust Versus Torque OLE-75 Thrust versus Torque OLE-150 Thrust versus Torq ue OLE-350 Thrust versus Torque ORIGINAL LINE ELECTRIC® ACTUATORS 16 NOTE: The curves above are based on a number of design factors, including the PV limit of the nut and the maximum torque compatibility of the coupler. Other factors combine to limit speed. Do not exceed thrust/speed values shown in above graphs as damage to actuator may result. BIMBA BIM-EMFL-0419 Catalog 2019 | For Technical Assistance: 800-442-4622

 Open the catalog to page 5

Bimba Original Line Electric Actuators Actuator Speed (inches/second) Actual Speed versus Motor RPM RPM Actuator Speed versus Actual Speed versus Motor RPM RPM Actuator Speed versus ORIGINAL LINE ELECTRIC ® ACTUATORS Self-lockingleads Self-locking Leads Actuator Speed (inches/second) Actual Speed versus Motor RPM RPM Actuator Speed versus 6000 Actuator Speed (inches/second) Actuator Speed (inches/second) BIMBA BIM-EMFL-0419 Catalog 2019 | For Technical Assistance: 800-442-4622

 Open the catalog to page 6

Actuator Specifications Operating temperature range: 32° F to 122° F (0° C to 50° C) limited by the drive. If the drive is remotely mounted and protected from heat, maximum operating temperature will be 160° F (71° C). Maximum stroke: 18 inches RoHS compliant 1 Self-locking threads 2 Inches per revolution of screw 3 Amount of end play on screw 4 Inertia is given per inch of stroke 5 Inertia for motor by itself 6 For drive sizing for actuators supplied without drives Caution! When specifying actuator stroke before ordering, always add at least 1/8 inch to the full stroke required in your...

 Open the catalog to page 7

How To Specify Specifications and Sizing: DC Stepper Motors ORIGINAL LINE ELECTRIC ® ACTUATORS Speed/Thrust Performance Vertical Orientation*, Pounds and Inches/Second Maximum Continuous Stepper Motor and Motor/Drive Options (P1, E1, Y1, Z1) * Vertical orientation is worse-case. These values are thrust values and in a horizontal orientation will result in moving loads above the thrust values indicated in the graphs. ** Original OLE-75 with P2 motor performance graph. BIMBA BIM-EMFL-0419 Catalog 2019 | For Technical Assistance: 800-442-4622

 Open the catalog to page 8

How To Specify Specifications and Sizing: DC Stepper Motors COLLABORATIVE ROBOT VACUUM TOOL ORIGINAL LINE ELECTRIC ® ACTUATORS Speed/Thrust Performance Vertical Orientation*, Pounds and Inches/Second Maximum Continuous * Vertical orientation is worse-case. These values are thrust values and in a horizontal orientation will result in moving loads above the thrust values indicated in the graphs. BIMBA BIM-EMFL-0419 Catalog 2019 | For Technical Assistance: 800-442-4622

 Open the catalog to page 9

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. Pinch Valves

    46 Pages

  3. 500 series

    6 Pages

  4. PIV

    2 Pages

  5. SWITCHES

    44 Pages

  6. TRD Full Line

    304 Pages

  7. IntelliSense®

    24 Pages

  8. Pinch Valves

    40 Pages

  9. NPT Gauges

    2 Pages

  10. Grippers

    8 Pages

  11. EdgeSwitch

    2 Pages

  12. Air Presses

    2 Pages

  13. Valves

    76 Pages

  14. Flat Cylinders

    130 Pages

Archived catalogs