video corpo

Original Line Cylinders - 124 Pages

Add to MyDirectIndustry favorites
Original Line Cylinders

Catalog excerpts

Original Line Cylinders Bimba's classic "Blue and Improved" Original Line® continues to set the standard for non repayable air cylinders. This product line features an incredible variety of standard models, including three-position, MRS, non-rotating, and PC air cylinders. Design enhancements to this line, including permanent grease lubrication, have more than doubled the anticipated service life of this industryleading, non-repairable family of air cylinders. Bimba is part of BIMBA BIM-PFL-0119 Catalog 2019 | For Technical Assistance: 800-442-4622 11V11 Engineering

 Open the catalog to page 1

Contents 13 Types of Cylinders 14 Cushion Energy Absorption 15 Specification Details 19 Original Line Cylinders 19 – 5/16” Bore Air Cylinders 21 – 7/16” Bore Air Cylinders 25 – 9/16” Bore Air Cylinders 27 – 3/4” Bore Air Cylinders 33 – 7/8” Bore Air Cylinders 35 – 1-1/16" Bore Air Cylinders 42 – 1-1/4" Bore Air Cylinders 45 – 1-1/2" Bore Air Cylinders 52 – 1-3/4" Bore Air Cylinders 54 – 2" Bore Air Cylinders 56 – 2-1/2" Bore Air Cylinders 57 – 3" Bore Air Cylinders 58 – Original Line Stainless Steel Body Options 59 – Fail Safe Length Adders 61 – Switch Track Kit Options 62 – Original Line...

 Open the catalog to page 2

Bimba manufactures several different types of Original Line cylinders for your applications. These include the basic 5/16" to 3" bore cylinders described on pages 19-57. Weights published for each cylinder are approximate. Additional styles include: Three-Position Cylinders This multi-position Original Line stainless body cylinder provides three positive stroke positions with a single cylinder. Cushion Cylinders These include adjustable air cushions that slow cylinder speed at the end of stroke, reducing impact and extending cylinder life. Cushions can be ordered on rear, front or both...

 Open the catalog to page 3

ORIGINAL LINE CYLINDERS 14 Cylinders with air cushions provide a possible solution to destructive energies. The air cushion traps a small amount of exhaust air at the end of stroke, providing an air pocket that decelerates the load. This reduces the potentially destructive energy being transmitted to the cylinder and other components. The following is a brief explanation on how to determine the energy level of your application and decide if an air cushion can provide adequate energy absorption. For a more detailed description, consult the factory at 1-800-44-BIMBA. 1. Determine the load to...

 Open the catalog to page 4

How To Specify Specification Details Accessories have separate catalog numbers and are shown at the end of each bore size section. Most accessories are zinc-plated carbon steel. We also offer stainless steel accessories in some bore sizes. Lubrication Standard Original Line Cylinders are pre-lubricated at our factory with a semi-synthetic grease and do not require additional lubrication during their service life. In some instances where a specified option is not conducive to our standard grease prelubrication, such as our High Temperature and Hydraulic options, alternate standard...

 Open the catalog to page 5

ORIGINAL LINE CYLINDERS 16 Maximum Stroke Without SR- Option How To Specify Specification Details Mounting Mounting should be by the threaded stud ends, pivot or bolt holes provided. Mount cylinders to provide alignment with the driven mechanism, avoiding side loads that restrict the free operation of the cylinder. Free Test Cylinder Since 1975, our policy has been to provide a FREE TEST CYLINDER to any qualified original equipment manufacturer. This service is provided at no obligation, but we would appreciate a copy of your test results. Contact us or your local stocking BIMBA distributor...

 Open the catalog to page 6

How To Specify Fractional Stroke Lengths Fractional stroke lengths for single and reverse acting cylinders, both standard and nonstandard, require special calculations to determine cylinder dimensions. The following equations apply: Single Acting Cylinders Calculate the length of next whole standard increment of stroke, then subtract the difference between desired stroke and next longer whole increment of stroke. Example: 092.75 090 Base length = 1.94" Plus 1.56 per inch of stroke = +4.68" 1.56 X 3.0 (next longer stroke increment) 093 length = 6.62 Whole stroke increment = 3.00" Minus...

 Open the catalog to page 7

ORIGINAL LINE CYLINDERS 18 Thread Size How To SpecifySpecification DetailsNose Mount Torque ValuesPressure Rating Original Line, Cushioned Original Line, NR 250 psi series, Z-line, MRS and hole punchers: PC cylinder: 100 PSI Bimba 500 Hydraulic: 500 PSI hydraulic BIMBA BIM-PFL-0119 Catalog 2019 | For Technical Assistance: 800-442-4622

 Open the catalog to page 8

How To Specify 5/16” Bore Air Cylinders >> >> Enclosed Spring Force: .5lb Relaxed — 1lb Compressed Cushion Quiet Bumpers Standard on All Models See also: Option Combination Availability Chart Rod Wiper (W) »» Not available in standard single acting Magnetic Position Sensing (M) »» Add .15" to overall length »» Must specify track(s) for use with Bimba’s miniature position sensing (T2, T3, T4). See page 61 for track location details. See Switch Products for switch selection information. Low Pressure Hydraulic (HL) »» 250 psi maximum »» Double acting models only »» Option specified as a prefix...

 Open the catalog to page 9

How To Specify 5/16” Bore Air Cylinders ORIGINAL LINE CYLINDERS Ground and Roller Burnished 303 Stainless Steel Piston Rod Standard Force Exerted Approximately 0.07 of Air Line Pressure Enclosed Spring Force: .5 lb. Relaxed — 1 lb. Compressed Cushion Quiet Bumpers Standard on All Models Enter Stroke Length as 4th Digit Model 007 Reverse Single Acting – Pivot and Pull Type – Rod Normally Extended – Spring Return – Rear Pivot Mounting Standard Stroke Lengths: 1/2", 1", 1-1/2", 2", 2-1/2", 3" Maximum Stroke – 4" Stainless Steel Rod Standard Optional Accessories: D-26765 Mounting Bracket...

 Open the catalog to page 10

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. Pinch Valves

    46 Pages

  3. 500 series

    6 Pages

  4. PIV

    2 Pages

  5. SWITCHES

    44 Pages

  6. TRD Full Line

    304 Pages

  7. IntelliSense®

    24 Pages

  8. Pinch Valves

    40 Pages

  9. NPT Gauges

    2 Pages

  10. Grippers

    8 Pages

  11. EdgeSwitch

    2 Pages

  12. Air Presses

    2 Pages

  13. Valves

    76 Pages

  14. Flat Cylinders

    130 Pages

Archived catalogs