video corpo

MEAD Full Line Catalog - 72 Pages

Add to MyDirectIndustry favorites
MEAD Full Line Catalog

Catalog excerpts

Catalog Your stocking distributor is: Full Line Catalog Mead Fluid Dynamics Bimba Manufacturing Headquarters 4114 North Knox Avenue Chicago, IL 60641 Phone: 773-685-6800 Toll Free: 877-MEAD-USA Fax: 773-685-7002 Phone: 708-534-8544 Toll Free: 800-44-BIMBA Fax: 708-235-2014 Email: sales@mead-usa.com Email: cs@bimba.com PNEUMATIC • ELECTRIC • HYDRAULIC ACTUATORS FITTINGS — MANIFOLDS — VALVES — AIR PREPARATION — SAFETY & PRODUCTION Mead Fluid Dynamics Full Line Catalog BIMBA BRANDS I ACRO I MEAD I MFD I PNEUMADYNE I TRD Bimba Manufacturing Company Bimba distributor nearby ready to service your needs. © Copyright 2016 Bimba Manufacturing Company. MEAD-FL-316 Effective March 2016. All Rights Reserved. Production Devices Worldwide distribution means there is a professional sto

 Open the catalog to page 1

Control Valves Isonic® Isonic® V1000 Series Isonic® V2000 Series Isonic® V4000 Series Manifold PowerStrip™ Isonic® Accessories Nova Capsula Dura-Matic 4-Way Valves Ergonomic Low Stress Air Valve LTV MV 3-Way Switches Cam, Foot, Hand and Button Valves Lockout and Easy-Glide Ball Handle Valves Mini Solenoid and Binary Valves Air Timers and Impulse Relay Valves Stroke Sensors and Air to Electric Switches Dash/Panel Mount Control Valves Dyla-Trol® Flow Controls Two-Hand Control Valves Production Devices Air Presses Heavy Multi-Stage Press Air Press Dimensions Air Tools Small Bore Tie Rod DM1 &...

 Open the catalog to page 2

Mead offers a wide selection of cylinder styles. Bore Model Number Port Size (NPTF) NFPA Interchangeable Extruded Body Design 1-1/2" Through 4" Bore Sizes 3/4" and 1-1/8" Tie Rod Models Available External Rod Bearing NFPA Interchangeable Tie Rod Design 1-1/2" Through 6" Bore Sizes NFP Style Cylinders Tie Rod Design Bore Sizes: 5, 8, 10,12 Medium Duty Round Non-Lube Cylinder Easy To Mount 1-1/8" Through 3" Bore Sizes Highly Compact Low Profile Cylinder 3/4" Through 4" Bore Sizes *Specify "FOR HY USE" when ordering DA/SA...

 Open the catalog to page 3

Reference Electrically Actuated Double Solenoid Single Pressure Double Pressure Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Int. Air Int. Air Int. Air Int. Air Spring Spring Int. Air Spring Spring Spring Spring Spring Ext. Air Ext. Air Ext. Air Ext. Air Ext. Air Ext. Air Ext. Air Ext. Air Double Bleed Foot Actuated Pedal Foot Treadle Ext. Bleed Ext. Bleed Ext. Bleed Ext. Bleed Spring Spring Foot Foot

 Open the catalog to page 5

Control Valves Reference Control Valves The Award-Winning “Half-Shell” Design Faster Manifold Connections The heart of the Isonic® concept is its patented “half-shell” design. Composed of two mirror-image halves, Isonic® allows its flow channels and internal component compartments to be designed directly into these molded body sections. Valve bodies are molded of high-strength, glass-impregnated Ultem thermoplastic. The Isonic® manifold system has been designed to virtually eliminate downtime, eliminating all end plates, screws, o-rings and gaskets customarily found in manifold systems....

 Open the catalog to page 6

Isonic® V1000 Series (2 and 3-Way) Control Valves Specifications Solenoid Data Voltage Response Time:    10 milliseconds Molex Connector:    UL and CSA Listed Din Connector:    Protection Class- IP 65 according to DIN 40 050 Insulation Class- Group C according to VDE 0110 Conform to DIN 43650 Form C Specifications Manifold Common Air Inlet: Foot Mounting: DIN Rail Mounting: Built-in, push-in fittings for 1/4" OD or 6mm tubing both ends 4 slots, 11/16" diameter Attaches to 15mm DIN rail Accessories Valves:

 Open the catalog to page 7

Control Valves Options T1 = Tapped Exhaust (10-32) T2 = Tapped Exhaust (M5x0.80) Product Category V = Valve Family 1 = Isonic® 1000 (2-way, 3-way) LED 0 = No LED 1 = LED (not available with connector Z) Control Valves Connector W = Mini Quick Connect X = 8mm Micro DIN (connector not included) Y = Flying Lead Z = Flying Lead (without LED and Circuit Protection - DC only) Flow Pattern 02 = 2-Way Normally Closed 04 = 3-Way Normally Closed 05 = Vacuum (3-Way) Normally Closed 06 = Vacuum (2-Way) Normally Closed Specialty Valves Product Category M = Manifold Options A = Aluminum Manifold...

 Open the catalog to page 8

Isonic® V2000 Series (2 and 3-Way) Control Valves Dimensions Valves Manifolds 9 PIN D SUB CONNECTOR OUTLET PORT 5/32" [4mm] PUSH IN COLLET •REAR MOUNTING HOLES FOR M4 SCREWS -OPTIONALDIN RAIL MOUNTING KIT FOR 35 mm RAJL -MAJN SUP PLY 1/4" OR 6mm PUSH IN COLLET -MANIFOLDS IN MULTIPLES 0 F 4 AN 0 8 ST AT I ON S M AY BE ATTACHED TOGETHER BY LOCATING MOUN Tl MG FEET INTO RECESSES IM OPPOSITE FACE Manifold    A    B    C    D Note: Dimensions in inches [mm] 9-Pin Sub-D Connector (4 Station Manifold Only) 9-Pin Sub-D Connector (8 Station Manifold Only)

 Open the catalog to page 9

Isonic® V2000 Series (2 and 3-Way)Solenoid Data Specifications - Normally Closed Version Cycle Life*: Orifice Size: Response Time:    10 milliseconds Molex Connector: DIN Connector: Maximum Pressure: UL and CSA Listed Protection Class: IP 65 according to DIN 40 050 Insulation Class: Group C according to VDE 0110 Conform to DIN 43650 Form C Specifications Standard Power: A: 120 PSI / 8.3 Bar B: 120 PSI / 8.3 Bar C: 30 PSI / 2.1 Bar Low Power: A: 45 PSI / 3 Bar B: 45 PSI / 3 Bar Manifold Common Air Inlet: Rear Mounting: Built-in, push-in fittings for 1/4" OD or 6mm tubing 2 Holes for M4...

 Open the catalog to page 10

Control Valves Isonic® V2000 Series (2 and 3-Way) How To Order Mini Quick Connect Required for Manifold 8mm Micro DIN (connector not included) Flying Lead Flying Lead (without LED and Circuit Protection - DC only) Product Category M = Manifold Production Devices Options 0 = No cable or connector 5 = With 5.0m cable and connector Manfiold Accessories 0 = Manifold only 1 = DIN Rail clips mounted on manifold 2 = Manifold mounted on DIN rail Inlet Tube Size A = 1/4" OD Tube Collets B = 6mm OD Tube Collets Number of Stations 04 = 4 Station 08 = 8 Station NOTE: Outlet tube size is 5/32” (4mm) OD...

 Open the catalog to page 11

All Bimba catalogs and technical brochures

  1. IntelliPress

    14 Pages

  2. Pinch Valves

    46 Pages

  3. 500 series

    6 Pages

  4. PIV

    2 Pages

  5. SWITCHES

    44 Pages

  6. TRD Full Line

    304 Pages

  7. IntelliSense®

    24 Pages

  8. Pinch Valves

    40 Pages

  9. NPT Gauges

    2 Pages

  10. Grippers

    8 Pages

  11. EdgeSwitch

    2 Pages

  12. Air Presses

    2 Pages

  13. Valves

    76 Pages

  14. Flat Cylinders

    130 Pages

Archived catalogs