GENERAL MECHANICAL ENGINEERING MEDICAL DENTAL TECHNOLOGY RENEWABLE ENERGY

One shrink fit chuck for all diameters M stands for Constant Maximum Clamping Forces. Due to the consistent maximum overlap of tool and chuck, the design ensures constant hight clamping forces. The sleeve is also available with pullout protection (Weldon). M stands for added value. For the first time, TMG-Multigrip can clamps tool shanks of almost any diameter with one and the same shrink chuck. In this way, the entire production requirement can be covered cost-effectively. The flexibility of basic holders can be used to cover the entire production requirement. Extreme holding forces - Exceptional...

 Constant maximum clamping forces  Increase of the metal removal rate  Process-safe clamping of all shank tolerances  Excellent damping properties therefore better surfaces and better maintenance of tolerances  One basic holder for all diameters  Anti pullout system for Weldon shanks  Concentricity ≤ 3 µm* *Concentricity of the tool-side taper of the fixture in relation to the machine-side interface. The new Bilz TMG clamping system combines the strengths of shrink clamping technology with the flexibility of collet solutions. The system consists of basic holders and specially coated collets....

Insert tool Unscrew the length stop, align the Weldon clamping surface of the tool so that it is on the side of the hole. Now insert the tool into the clamping sleeve until the Weldon clamping surface is in the area of the hole. Insert pin Insert the locking pin with the help of the tool into the hole as far as it will go. Attention: The pin must not protrude from the the clamping sleeve. Make the tool free from play Use the assembly tool to screw in the screw in the length stop until the tool is free of play. Caution: Do not apply axial pressure. Comparison of manual shrinking to automated shrinking...

bilz Professional and automated shrinking at a high level, including integrated pneumatic insertion device for ThermoGrip®-Multigrip chuck. ISG3460WK4-11-WS-BIL

Accessories needed Pole disc

Thermogrip®-Multigrip Collets TMG20... IK Peripheral CoolJet Screw-in fixture (manual)

WeCare The subject “Sustainability” targeted by the sister group Leitz, Boehlerit and Bilz Long-term thinking and sustainable action as a corporate strategy The global WeCare initiative combines the Group‘s worldwide activities, some of which have existed for decades, in the areas of society, social affairs and culture, as well as the protection of species, nature and the environment. The WeCare concept places particular emphasis on combining the strengths and commitment of all participating companies and employees in order to achieve the best possible result in terms of sustainability. This...