ThermoGrip® BIONICS Shrnk ctiurks with bionir strurtural oPtimisation increased stability tHrOUGH form OPTIMISATION

Form optimisation leads to an increase in the life and load capacity of the holder through a uniform structure throughout. The bearing structure of our Thermogrip® Bionic shrink chucks has been designed based on the growth form of trees, meaning that notch stress is avoided and only as much material is used as is required. silent running Smooth, due to “Balanced by Design” and subsequent fine balancing Perfectly suited for our Thermogrip® shrink machines   Shrinkable with standard coil 1 up to diameter 25 mm Shrink machine X parameters for shrinking in and out Data Chip holes Improved surface...

 Maximum bending strength due to the bionic contour  Higher feed rates and greater cutting depth  Increased torque transmission  Counterbore – the Thermogrip trademark  Lockable Cool Jet holes for peripheral cooling and  Improved surface quality due to optimal chip removal balance screw holes for fine balancing as standard A tree is stabilised on the windward side by means of its root system, and exactly this method has been used by our engineers to develop an exceptional shrink chuck with extremely high bending strength.” All cylindrical shanks manufactured to DIN1835 Form A, B and E, DIN...

You can find more detailed information in our online-shop https://www.bilz.de/produktfinder-anmeldung or in our ThermoGrip® shrink chuck catalogue Interchangeable discs for shrink fit chucks with very short A-dimensions (e.g. TBUC) The chuck dips easily into the ferrite disc here. At the same time it is ensured, that the coil does not rest on the collar of the HSK and thus the coil is not damaged when heated. 1 A-dimension: 70 mm to 75 mm possible (HSK63). From an A-dimension of 75 mm, the standard 1 disc can be used. 2 A-dimension: 75 mm to 82.5 mm possible (HSK63). From an A-dimension of 82.5...