Mobile_BR
16Pages

Central Lubrication Systems for mobile applications Products - Accessories - Service

About us The BIJUR DELIMON International Group includes brands known throughout the world: BIJUR, DELIMON, DENCO Lubrication, FARVAL and LUBE SITE. In the USA Joseph Bijur led the development of chassis lubrication systems for the world-famous Packard brand in the 1920s and for the Chevrolets in 1934. In the early 1950s we turned our attentions to Europe, and by the start of the 21st century had become the world market leader in the field of lubrication systems for trams and long-distance trains. Reliable automatic chassis lubrication was always a major part of the BIJUR DELIMON family...

Lubrication concepts for construction site machinery The progressive system Continuous lubrication Progressive type dividers, either in solid block, segmented or modular design, are fitted to the discharge side of a pump. The distribution of the lubricant to the individual lubrication points are maintained as long as the pump delivers lubricant. Block or segmented divider? There are valid arguments in favour of each type. Whilst with a segmented and modular type divider the emphasis is on simplicity of configuration for different metered quantities, for the block divider freedom from leaks...

Lubrication concepts for construction site machinery The single-line injector system Cyclic lubrication Is productivity your preferred measurement index? In contrast to progressive systems, singleline systems continue to operate even if a lubrication point is blocked or the pipe to a lubrication point is crushed. Only this lubrication point fails to receive lubricant - all other lubrication points continue to receive lubricant at every lubrication cycle. Optical monitoring is mandatory for all BIJUR DELIMON CXL series injectors, and this reports the problem at the lubrication point. You can...

DYNAMIS - pump systems DYNAMIS - compact and powerful • robust and powder-coated aluminium housing • compact and modular design • unique swash plate operated, forcecontrolled pump elements • combined outlet delivery volume, 5.8 cm3/minute maximum • integral electrical controller with data logger (option) • extensive temperature range ( - 40oC to + 75oC) • ZnNi coating for the assembly parts • individual configurable • 2 and 4 litre reservoirs • follower plate and stirrer options • reservoir low level signal • IP67 protection • oils and greases up to and including NLGI 2 consistency •...

DYNAMIS - pump systems Specification DYNAMIS DYNAMIS Maxx Operating pressure, max.: Reservoir size: Number of outlets, max.: Delivery volume per outlet: Temperature range: Lubricants: Protection class: Materials: Number of outlets with flanged divider: System types: Power supply options: Current consumption: Drive: 300 bar 2 and 4 litre 1 combined or 2 separate 1.3 or 2.9 cm3/min - 40oC to + 75oC Oil and greases up to including NLGI 2 consistency IP67 Pressure loaded parts: Steel Housing: Aluminium Reservoir and cover: Plastic max. 16 Single-line injector, multi-line, progressive, air-oil,...

DYNAMIS - pump systems Order overview for standard types DYNAMIS Basic configuration Reservoir with follower plate or stirrer with low level switch. Filling connection fitting. Electrical connections Without controller: 1x plug DIN 43650, 3-pole and 1x plug M12x1, 4-pole With internal controller: 1x plug DIN 43650, 3-pole and 1x plug M12x1, 8-pole and 1x cable gland Delivery volume Standard type with one outlet and integrated low level switch 2 litre grease reservoir 3 4 litre grease reservoir Delivery volume Divider outlets Standard type with pCo controller, low level switch and assembled...

DYNAMIS - pump systems Order overview for standard types DYNAMIS Maxx Basic configuration Reservoir with follower plate or stirrer with low level switch. Filling connection fitting. Electrical connections Without controller: 1x plug DIN 43650, 3-pole and 1x plug M12x1, 4-pole With internal controller: 1x plug DIN 43650, 3-pole and 1x plug M12x1, 8-pole and 1x cable gland Delivery volume Standard type with one outlet and integrated low level switch 8 litre grease reservoir 12 V 24 V 12 litre grease reservoir 12 V 24 V Delivery volume Divider outlets Standard type with pCo controller, low level...

Dividers & Injectors BIJUR DELIMON offers a comprehensive range of dividers and injectors. The progressive system utilises dividers of the block, segmented or modular type with a number of outputs, or the single line system can employ a multiplicity of single-line injectors with 0.05 to 1.6 cm3 delivery. The extensive options offer an optimum solution to every lubrication requirement. Although the systems are different, the dividers, injectors and manifolds are all manufactured from the same high quality carbon steel; DIN 50979 with Fe/ZnNi8 plating. This gives our components corrosion...

Dividers & Injectors Progressive divider ZP-A / ZP-B segmented divider design • Segmented design progressive divider • 6 to 24 outlets • Carbon steel with ZnNi coating • Suitable for grease and oil • Metering element outputs 0.1; 0.2; 0.3 (ZP-A) 0.5; 1.2; 2.0 (ZP-B) cm3 per stroke/outlet • • • • • • Segment sealing gaskets (no O-rings) High metering accuracy Operating pressure max. 160 bar (ZP-A); 300 bar (ZP-B) Multiple outlet options and variations Motion indicator (option) Electrical monitoring (option) M2500 modular valve divider • Modular design progressive divider • Comprising end...

Dividers & Injectors Single-line injectors Single-line injectors are used whenever multiple lubrication points require a precise, individually metered quantity. Each injector is set for a defined metered quantity. Single line systems are simple to install and can be extended as required. Individual pre-set output 0.05 to 0.4 cm3/stroke Injector manifolds for 2 to 12 injectors suitable for greases up to and including NLGI 2 VITON® seals Direct injection Carbon steel with ZnNi coating Visual motion indicator Operating pressure: 82 bar minimum / 248 bar maximum Individual adjustable output 0.13...