BUUR DELIMON The full line of cost reducing, single-point lubrication solutions.

© BIJUR DELIMON INTERNATIONAL LUBESITE SYSTEMS

Overview LubeSite—the Systematic Approach to Single-Point Lubrication Grease and oil lubrication are critical parts of maintenance in any industrial operation. Proper lubrication saves a tremendous amount of money by reducing equipment downtime and lost labor hours, as well as giving equipment longer life. Why take chances with lubrication? LubeSite by Bijur Delimon eliminates the guesswork. Your local distributor can show you how. Environmentally-minded manufacturers will appreciate the refillable feature of these single-point lubricators, since the unit can remain mounted on a bearing, with...

GREASE FEEDERS LubeSite Grease Feeders Applications LubeSite automatic lubricators can be used on any equipment that has: ++ Anti-friction oscillating, ball or roller bearings ++ Shielded bearings with seals ++ Bronze, oilite or open bearings ++ Requires bearing flushing action ++ Uses NLGI grade 0 to grade 4 non-separating grease ++ Operates in an ambient temperature from -10°F to 450°F (-23°C to 232°C) LubeSite 404: 0°F to 200°F (-17°C to 93°C) LubeSite Series 200, 300, 500: -10°F to 250°F (-23°C to 121°C) LubeSite 704: 0°F to 450°F (-17°C to 232°C) Refillable/reusable On-demand operating principle...

Save Money Almost half of all bearing failures are due to improper lubrication. Over- and/or under-greasing cause the majority of problems. Here are the major advantages of using a LubeSite product: ++ Fewer replacement bearings ++ Less downtime for bearing replacement ++ Less grease used ++ Fewer man-hours spent relubricating Prevent Over- and Under-lubrication Manual greasing with a grease gun is a method of lubrication determined by an estimate of the amount of grease used. The fact is, there is no accurate way to know when a bearing is getting too little or too much grease. The variables...

GREASE FEEDERS Installation Operation LubeSite automatic grease feeders have only two moving parts (spring, piston with metering rod and piston seal ring). The design combines foolproof simplicity with rugged component strength for dependable, controlled lubrication. The graduated channels in the meter rod allow the bearing to use grease as required. Once the reservoir is filled and the unit is connected to a bearing, the single-point lubricator uses Venturi action to discharge lubricant only when the bearing is in motion. Thus, grease is never packed into the bearing. This benefits manufacturers...

LubeSite Grease Feeder (cut-away) TRANSPORT DOME ALLOWS VISIBILITY OF GREASE LEVEL COIL SPRINGS, LIGHT, MEDIUM OR HEAVY DEPENDING ON WEIGHT OF GREASE PISTON AT FULL POSITION LONG-LASTING 0-RING- 70 DURO. BUNA N REFILLABLE UNIT USES WHICHEVER GREASE YOU ARE NOW USING PRECISION TAPERED METERING ROD CONTROLS FLOW BASE COUPLER PROVIDED WITH 1/8” NPT OR 1/8” BSP THREAD (SPECIAL ORDER) ADAPTERS AVAILABLE FOR MANY FITTING SIZES AND POSITIONS Maintenance and Cleaning LubeSite units are made from high-quality, heavy-duty engineered materials and are manufactured to meet rigid standards. These units require...

GREASE FEEDERS Size and Spring Static and Dynamic Bearing Conditions LubeSite 200 Series is specifically designed for bearing housings that operate under static conditions. These units should not be specified for dynamic conditions. Specify the 300 Series (metal base) units for dynamic, impact, high torque or vibrating applications. LubeSite 404 disposable unit is for use on static operations with minimal shock or vibration. Harsh Atmospheres LubeSite 500 Series is designed for corrosive atmospheres while the 704 unit is designed for high temperature (up to 450ºF) applications. Grease Types Almost...

LubeSite Size Selection Guide Bearing Shaft Diameter Operating Condition Bearing Shaft Diameter Note: Bigger isn’t always better. Don’t intentionally oversize LubeSite units. LubeSite Spring Selection Guide Operating Temperature How to Order Springs Color Part # For use with the following units 202/302/502 Extra heavy Available for 1 oz, 2 oz and 6 oz grease feeders to be used on extension and where greater pressure is desired for flushing action. LUBESITE SYSTEMS © BIJUR DELIMON INTERNATIONAL

GREASE FEEDERS LubeSite 200 Series Polycarbonate Base LubeSite 200 Series feature a clear, polycarbonate reservoir and base. This design allows for a visual inspection of the units’ internal workings. The 200 Series units should be specified for applications with minimal vibration, impact, shock, high-torque or centrifugal forces. Units are assembled with medium springs (three additional light and heavy springs are included in each box of ten). An extra heavy (orange) spring is available for applications requiring the use of an extension or for higher pressure flushing applications. LubeSite...

LubeSite 300 Series Metal Base LubeSite 300 Series are designed for applications subject to vibration, impact, shock, high-torque or centrifugal forces. Units are assembled with medium springs (three additional light and heavy springs are included in each box of ten). An extra heavy (orange) spring is available for applications requiring the use of an extension or for higher pressure flushing applications. LubeSite unit 360 is individually boxed with a light (blue) and heavy (red) spring. Technical Data Material Lightweight anodized aluminum Thread Size Operating Temperature How to Order Reservoir...

GREASE FEEDERS LubeSite 404 Pre-filled Polycarbonate Unit LubeSite 404 should be specified for applications with minimal vibration, impact, shock, high-torque or centrifugal forces. It has a transparent Lexan® polycarbonate reservoir. It is filled with 4 oz of high-quality, multipurpose, Lithium-based NLGI grade 2 grease. Grease is USDA, class H-2. The LubeSite 404 unit is not refillable. SCREW CAP SPRING O-RING 1/4” NPT CAP PLUG (REMOVED FOR CLARITY) Technical Data Material Polycarbonate reservoir Thread Size See page 34 for available couplers. Operating Temperature How to Order Reservoir Capacity...