1. Catalogs
  2. BIJUR DELIMON INTERNATIONAL
  3. HyperFormance Chain Pin System

HyperFormance Chain Pin System

HyperFormance Chain Pin System

HyperFormance Chain Pin System

Product catalog summary
Overview
The HyperFormance Chain Pin System is an automatic air/oil lubrication kit designed to deliver precise oil droplets to chain pins, enhancing machine performance. It is an economical solution for lubrication needs in industrial settings.

Kit Components
The kit includes a lubricator, HyperFormance air/oil mixing valve, air mixing valve solenoid, nylon tubing, compression bushings and sleeves, adapters, nozzles, and a timer (only for 4-liter models).

Application and Operation
The system uses a mixing valve to deliver oil droplets to chain pins. The oil flow is controlled by machine usage, with a preset injector output and air pressure governing the delivery pressure. The system supports up to 30 cycles per minute.

Technical Specifications
  • Reservoir Capacity: 2 or 4 liters
  • Delivery Volume: 0.025cc per outlet
  • Viscosity Range: 150-8000 SSU
  • Operating Temperature: 32°F to 120°F
  • Air/Oil Pressure Ratio: 1:4
  • Maximum Inlet Pressure: 125 psi
  • Minimum Inlet Pressure: 70 psi


Electrical Data
The solenoid operates in a 3-way, 2-position normally closed mode, with specific current and voltage requirements. The timer, available only for 4-liter models, has a power consumption of 1.0 W maximum.

Ordering Information
Orders should specify the system name, reservoir size, solenoid valve type, and part number. Various configurations are available based on the number of lubrication points and voltage requirements.

Service Parts
Service parts include solenoid valves, reservoir gaskets, level switches, flow control valves, mixing valves, fill strainers, and timers. Detailed part numbers are provided for ordering replacements.

Dimensional Schematics
Dimensions for both 2-liter and 4-liter reservoirs are provided in inches, aiding in installation and maintenance planning.
See more

Catalog excerpts

HyperFormance Chain Pin System-1

BIJUR REUNION INTERNATIONAL General The chain pin automatic air/oil system is an economical lubricator package that delivers precise oil droplets to chain pins for improved machine performance. Kit Components Description Quantity HyperFormance Air/Oil Mixing Valve 1 Air Mixing Valve Solenoid 1 5/32" Nylon Tubing (Part #5N25) 10 ft per outlet Compression Bushing (Part #B1371) 2 Compression Sleeve (Part #B8272) 2 Nozzle (Part #34031-4) --Timer — 10 ft per outlet 1 per outlet 1 per outlet 1 per outlet 1 per outlet 1 Application The chain pin automatic air/oil system uses Bijur Delimon's HyperFormance air/oil mixing valve to deliver precise oil droplets to chain pins and other moving mechanisms. Operation Individual programmed air and oil flows are machine controlled and regulated by machine usage. Oil output is related to cycles per unit time. Injector output is preset to a fixed discharge and supply air pressure governs the pump output delivery pressure. Individual air/oil delivery lines from mixing block propel oil droplets to chain's surface. Technical Data Reservoir Capacity Delivery Volume .025cc per outlet (additional outputs available on request) Normal Cycle Range Operating Temperature Oil Outlet Connection 5/32" diameter tubing Air/Oil Pressure Ratio Maximum Inlet Pressure Minimum Inlet Pressure 1 Viscosity range at operating temperature may be restricted by internal relief valve (consult Bijur Delimon). 2 System parameters may affect this rate (consult Bijur Delimon). BIJUR DELIMON INTERNATIONAL (919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX WWW.BIJURDELIMON.COM 2100 Gateway Centre Blvd., Suite 109 Morrisville, NC 27560

 Open the catalog to page 1
HyperFormance Chain Pin System-2

Electrical Data Current Operation Mode Low Level Switch Continuous duty, Encapsulated Class F Connector pin assignment according to DIN 43650 Form A 3 way, 2 position, normally closed 0.17 amp at 110 VAC Electrical Data for Timer* Power Consumption 1.0 W maximum Switching Load 1max = 0.5 at supply voltage 110/230V, 50/60 Hz 1max = 1-5 at supply voltage 24-48V, 50/60 Hz Cable Outlet Rotatable in 90° steps Poles 2-pole and earth ground How to Order Name Reservoir Solenoid Valve 1 Point Part # 2 Points Part # 4 Points Part # When ordering, specify by name, reservoir, solenoid valve and part number,...

 Open the catalog to page 2
HyperFormance Chain Pin System-3

Dimensional Schematics2 Liter Reservoir Measurements shown in inches. BIJUR DELIMON INTERNATIONAL (919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX WWW.BIJURDELIMON.COM 2100 Gateway Centre Blvd., Suite 109 Morrisville, NC 27560

 Open the catalog to page 3
HyperFormance Chain Pin System-4

Dimensional Schematics4 Liter Reservoir Measurements shown in inches. BIJUR DELIMON INTERNATIONAL (919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX WWW.BIJURDELIMON.COM 2100 Gateway Centre Blvd., Suite 109 Morrisville, NC 27560

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.