DS Series

DS Series

DS Series

Product catalog summary
General Overview
The DS Series Lubricator is a motorized oil/grease pump designed for use in series progressive lubricating systems and single line resistance systems (SLR) for light industries and machinery. It features a DC motor-driven piston pump with power-off load relieving functions, suitable for small-volume, large-output flow applications.
Operation
The lubricator operates by using a motor to drive gears that reduce speed and actuate a piston. This piston movement draws oil or grease into the pump and pushes it through a check valve into lubrication lines. The system can deliver fixed quantities of lubricant at predetermined times when used with a separate programmed controller. A built-in relief valve protects the lubrication system.
Technical Specifications
  • Motor Voltage: 24 VDC
  • Amperage: 2 amp
  • Wattage: 50 W
  • Max. Operation Pressure: 1450 psi (100 bar)
  • Discharge Rate: 25 ml/min
  • Reservoir Capacities: 0.5, 1, and 2 liters
  • Thread of Outlet: 1/8” NPT
  • Oil Range: N32-N460
  • Grease Range: NLGI grade 000-0
  • Filling Grease Fitting: Quick disconnector, zerk
  • Filling Oil: Filler cap
  • Low Level Switch: Available on all models
Usage Notes
  1. Verify pump voltage and electrical connections before use.
  2. Use only clean oil or grease.
  3. Fill the reservoir through the quick connector zerk for grease.
Safety Instructions
Read the manual carefully before installation or operation. Ensure the product is turned off and disconnected from power before servicing. Proper grounding is essential to prevent injury.
Ordering Information
Various models are available with different reservoir capacities and low-level switch options. Part numbers are provided for each configuration.
Wiring Information
  • Lubricator Motor Wires: Brown “+”, Blue “-”
  • Low Level Switch: COM - BLACK, N.C. - RED, N.O. - BLUE
Dimensional Schematics
Dimensions are provided for grease and oil models with different reservoir capacities, detailing lengths and heights.
See more

Catalog excerpts

DS Series-1

DS Series Lubricator Motor-driven, Progressive and SLR Systems General The DS Series Lubricator motorized oil/grease pumps are piston discharge pumps driven by DC motor, controlled by a controller or PLC (not included). The DS Lubricator has small-volume, largeoutput flow and power-off load relieving functions. It can be used in series progressive lubricating systems and in single line resistance systems (SLR) for light industries, forging machinery, etc. Operation The motor drives gears to reduce speed and actuates a piston that moves back and forth by means of a crank. With the movement, oil/grease is pulled into an opening at the base of the pump and flows out past a check valve into the lubrication lines. Fixed quantities of oil or grease can be delivered to each lubricating point at predetermined times when used with available programmed controller (sold seperately). A relief valve is provided inside the pump to effectively protect lubrication system. Technical Data Motor Voltage Reservoir Capacity Grease Range Filling Grease Fitting Quick disconnector, zerk Notes Regarding Use 1. Before initial use, verify the pump’s voltage and proper electrical connection. 2. Use clean oil or grease only. 3. Fill reservoir through the quick connector zerk only (grease). Before installing or operating this product, please read this manual carefully. Failure to follow instructions can result in damage to the product and/or serious bodily injury. Before performing service to product, always turn off and disconnect electrical power. BIJUR DELIMON INTERNATIONAL When connecting product, make sure that unit is securely and adequately grounded. Failure to ground properly may cause serious injury.

 Open the catalog to page 1
DS Series-2

BUUR DELIMON Name Motor Voltage Lubricant Reservoir Capacity Low Level Switch Parts DS-260 Lubricator 24VDC Grease 0.5 liter No 42666-1U Lubricator Motor Wires BUUR DELIMON INTERNATIONAL 2100 Gateway Centre Blvd., Suite 109

 Open the catalog to page 2
DS Series-3

BIJUR DELIMON Dimensional Schematics Grease Models LOW LEVEL SWITCH (optional) MOUNTING HOLES LOW LEVEL SWITCH (optional) FILLE.R CAP MOUNTING HOLES BIJUR DELIMON INTERNATIONAL 2100 Gateway Centre Blvd., Suite 109

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.