DDM & SDM Modular Valves
4Pages

DDM & SDM Modular Valves Dualine, Grease & Oil General Dualine DDM and SDM lubricating valves have many advantages over traditional line mounted models. All working parts are in the module and these modules are tted to base manifolds which are permanently tted to the centralized lubrication system. The double discharge module DDM feeds two lubrication points on alternative system cycles while the single discharge module SDM feeds a single lubrication point on each cycle. A mixture of double and single discharge modules can be tted to each manifold either for assembly to serve an odd number of bearings or to give a greater lubricant quantity to selected points. Three sizes of modules can be supplied to cover a wide range of metered application volumes. Features Modules + Each module can be individually adjusted within its capacity to suit the bearing requirements. + A malfunctioning module can be changed in seconds, reducing maintenance time and costs. + Positive hydraulic operation – Within design limitations, these valve assemblies can be mounted long distances from the central pumping station. + Visual indicator showing operation of each module. + Body protected by corrosion resistant electrophoretic paint. Manifolds + Manifolds can be permanently xed to the lubrication system pipework before valves are tted, reducing possibility of contamination during installation period. + O-ring recesses are tted into the top of the adapter so that the tter can observe the condition of the O-rings when he is tting the module. + Manifolds are available in various sizes for multiple module congurations. Technical Data Maximum Supply Pressure Temperature Range Lubricant Materials Module–Steel (electrophoretically painted) Manifold–Steel zinc plated Hardened steel Packing gland Indicator stem Stainless steel BIJUR DELIMON INTERNATIONAL (919) 465 4448 LOCAL (800) 631 0168 TOLL-FREE (919) 465 0516 FAX WWW.BIJURDELIMON.COM 2100 Gateway Centre Blvd., Suite 109 Morrisville, NC 27560

Discharge Discharge Per Outlet Per Double Cycle Valve Size Installation Module Each module can be supplied with four Viton O-rings and four M4 socket headed cap screws to enable it to be tted to the selected manifold base. Manifold Each manifold requires two mounting screws, except the two-module unit which requires one central mounting screw. (See accessories list on page 3 for ordering information.) The manifold should be mounted onto a at surface on the machine in any aspect before the modules are tted. This is necessary because the mounting screws are tted into counterbores which are...

Type of Module D— DDM module S— SDM module Visual Indicator 00— Without 01— With cover DDM1/SDM1 05— With cover DDM5/SDM5 15— With cover DDM15/SDM15 Revision Level A— Revision A The DDM & SDM Modular Valves feature a smart part number ordering system. Choose the module type, valve size and visual indicator. For example: To order a DDM module, valve size DDM15, without a visual indicator, you would use Part #DDM15A0000. 0 Accessories 00— Without Revision Level A— Revision A The DDM & SDM Manifolds feature a smart part number ordering system. Choose the manifold type and the number of...

BIJUR DELIMON Dimensional Schematics DDM&SDM Modules EACH ADAPTOR IS SUPPLIED WITH MS X 40 LONG SOCKET modules outlets EACH ADAPTOR IS SUPPLIED WITH M5X 30 LONG SOCKET o©^>©o O©^J©O COUNTER BORED -10 DIAX6.5 DEEP. modules outlets EACH ADAPTOR IS SUPPLIED WITH MS X 40 LONG SOCKET modules outlets Measurements shown in millimeters. BIJUR DELIMON INTERNATIONAL 2100 Gateway Centre Blvd., Suite 109