B446-T2 B465-T2 / B446-T3 B465-T3
16Pages

Double-spindle and double-turret turning centres featuring two Y-axes: from bar to the finished part B446-465 T2 20 years after the launch of the first QUATTRO machine, the third generation is now further enhanced by the new range of QUATTRO T2 turning centres now featuring a longer machine bed and flat guides on the X-axes. The main performance benefits offered by the robust machine components such as the structure, guides and turrets are: - reat rigidity allowing to G machine harder materials - eduction of cycle times and R longer tool service life - p to 30 tools available for U...

Models available B446-465 T2 S - turrets 2 - 2 spindles The new QUATTRO, range of double-spindle and double-turret turning centres for bar machining is available in the T2 and T3 configurations featuring two or three turrets with bar capacity of 51 or 70 mm. - 2 turrets equipped with live tooling - 2 spindles featuring C-axis - 2 turrets equipped with live tooling - 2 spindles featuring C-axis - 1 Y-axis - 2 turrets equipped with live tooling - 2 spindles featuring C-axis - 2 Y-axes

Generous machining area to achieve top-level performance. Simultaneous machining of T1 on M1 and T2 on the offset M2 Simultaneous machining of T1 and T2 on M1 using M2 as regular tailstock Legend = M1: main spindle • M2: sub-spindle • T1: upper turret • T2: lower turret X1 X1 X1

- utomatic and simultaneous A machining on both sides of any workpiece - -axis turning using both 4 turrets on main spindle for simultaneous operation - arts unloading performed P in idle time - eduction of non-productive R times - igher productivity H (up to 50%). The sub-spindle featuring a double movement is offset from the main spindle eliminating interference problems between the two turrets. X1 X1 B B M2 M2 M2 M2 M1 M1 M1 Simultaneous machining of T2M1 M1 and T1 on M2. Sub-spindle (M2) coaxial to the main spindle (M1) on As per picture 2, but with offset M2 to unload the parts in idle...

Double-spindle turning centres featuring three turrets and three Y-axes: high productivity in machining B446-465 T3 The new QUATTRO T3 range of machines equipped with three turrets and thirteen axes is the latest product developed by Biglia in the field of high-performance twin-spindle bar turning centres. The three turrets can perform simultaneous machining using three tools at the same time, thus reducing cycle time dramatically. Thanks to the design of the QUATTRO T3 range of machines, Biglia can achieve new competitive goals in bar machining of complex parts in medium-sized batches. The...

Models available complex parts from bar. The main performance benefits offered by the 30° slant bed and the robust machine components such as the structure, guides and turrets are: - reat rigidity allowing to G machine harder materials - eduction of cycle times and R longer tool service life - p to 50 tools available for U machining of complex parts and reduced set-up times - rgonomics and easy access E for retooling operations - Perfect removal of chippings - turrets equipped with live tooling 3 - 2 spindles featuring C-axis - 2 Y-axes - turrets equipped with live tooling 3 - 2 spindles...

Generous machining area to achieve top-level performance. Simultaneous machining of T1 and T3 (four axis) on the main spindle and T2 on the sub-spindle Simultaneous machining of T1 on the main spindle and T2 and T3 (four axis) on the sub-spindle Legend = M1: main spindle • M2: sub-spindle • T1: upper turret (left) • T2: upper turret (right) • T3: lower turret

The position of the three turrets enables reliable and flexible machining operations on both spindles. The main advantages are: - eduction of non-productive R times up to 30% if compared to T2 machines - utomatic and simultaneous A machining on both sides of any workpiece - -axis turning using the lower 4 turret on main and sub-spindle for simultaneous operation - inished parts unloading is F performed in idle time through both spindles. The combination of 36 live tool stations, 3 Y-axes, 2 C-axes and the possibility to accept more than 50 tools enables the complete machining of complex...

Wide range of equipment and options for T2 and T3 models. OPTIONAL MAIN FEATURES STANDARD FEATURES - 30° slant cast-iron bed - or 3 Biglia 12-station servo turrets 2 to suit T2/T3 models - Sub-spindle equipped with ejector and air blow. Axial movement for the T2 model - Bar-feeder interface - Rigid tapping - NC programmed automatic C parts-catcher - Finished parts conveyor - Chip conveyor - oolant system featuring 7 bar C pumps and filters - ash-down system to eliminate W chippings - Two colour alarm lamp - Electrical cabinet - air conditioned Tool Probing System H igh-pressure pump (30/40...

Fanuc CNC unit MANUAL GUIDE: QUICK AND EASY FOR PROGRAM RELIABILITY SBS: BIGLIA SAFETY SOFTWARE TOOL LOAD MONITORING CNC Fanuc 31i-Mod. B: - 0.4” colour liquid 1 crystal display - Alphanumeric full-keyboard - iglia operator panel B featuring softkeys - ata transmission: D Ethernet gate, memory card, RS 232 port, USB. The MANUAL GUIDE i software allows the execution of even the most complex programs with ease of operation. The graphical interface offers simple editing functions within a limited number of operations. Main features • Advanced cutting cycles (Turning and Milling) • Capability...

Siemens CNC control system PROGRAM GUIDE: INTUITIVE PROGRAMMING THANKS TO ANIMATED ELEMENTS® AND INTEGRATED HELP FUNCTIONS ENERGY SAVING AND TOOL LOAD MONITORING SYSTEM CNC Siemens 840D sl: - Sinumerik OPERATION - 5” colour liquid crystal 1 display - Alphanumeric full-keyboard - perator panel MCP 483C IE O featuring mechanical keys - ata transmission: D Ethernet gate, 3 USB. SHOPTURN: Programming has never been so easy This innovative software package provides operators with a simple and user-friendly graphical interface combined to a contour calculator and the 3D simulation allowing the...

MACHINING CAPACITY Bar capacity Max. swing over diameter Spindle nose Spindle bore Inside diameter of bearings Chuck diameter Motor power MAIN SPINDLE C axis: min. programmable value Spindle nose Spindle bore Drawtube inside diameter Inside diameter of bearings Chuck diameter Motor power (see diagram 3) C-axis: min. programmable value Offset stroke B-axis: stroke - rapid traverse UPPER TURRET 1 - LOWER TORRET 2 N° Turret indexing (1 pos) No of live tools Motor power (see diagram 4) X1-X2 axes: stroke - rapid traverse Z1-Z2 axes: stroke - rapid traverse Y1-Y2 axes: stroke - rapid traverse...