MEASURING TOOLS
10Pages

{{requestButtons}}

Catalog excerpts

MEASURING TOOLS - 2

MEASURING TOOLS POINT MASTER PRO SERIES POINT MASTER PRO Series is a precision 3-D touch sensor which will operate in non-conductive as well as conductive applications, resin, ceramic or coated workpieces, machines with ceramic spindle taper or bearings can all be accommodated. CYLINDRICAL Shank Type Touch Probe & Edge Finder For all materials, including non-conductive cutting tools,workpieces, and machine tools. L1 Battery life (Continuous use) Battery Panasonic Lithium BR435 1 Standard Stylus 1. PMP-10 has one LED only. 2. Above table indicates the specification when using stylus ST28-4R....

Open the catalog to page 2
MEASURING TOOLS - 3

MEASURING TOOLS Measuring Pressure Battery life Standard Weight (N) Battery (Continuous use) Stylus (kg) XY Z 90 hours 1.3 CR2 1 0.4 1.5 ST28-4R 0.5 SR44 2 24 hours 1. Above table indicates the specification when using stylus ST28-4R. 2. There is approx 5μm lag in X & Y directions and approx. 2μm lag in Z direction to illuminate LED lamp when stylus touches workpiece surface. ALTERNATIVE STYLUS The stylus (M3 thread) is replaceable. Please replace when different model of stylus required or if damaged. L Ideal for peculiarly shaped workpiece or tapered portion of plastic mold. * PMC-Series...

Open the catalog to page 3
MEASURING TOOLS - 4

MEASURING TOOLS POINT MASTER PMC SERIES POINT MASTER Series is a precision 3-D touch sensor to center and measure the workpiece. LED lamp illuminates when the stylus touches the workpiece. Stroke of stylus provides sufficient over-travel for safety. Point Master PMC and Point Center utilize conductivity from the machine, toolholder, Point Master / Point Center through workpiece. Measurement is not possible with non-conductive machine or workpiece. Point Master Point Center Audible Beep Machine spindle Touch Probe & Edge Finder CYLINDRICAL Shank Type Audible BEEP Repeatability (Probe)...

Open the catalog to page 4
MEASURING TOOLS - 5

MEASURING TOOLS BASE MASTER SERIES BASE MASTER Series is a precision touch sensor to determine workpiece offsets and tool length. Mounted on workpiece surface or machine table, LED lamp illuminates immediately when the cutting edge touches the sensor plate and the position is detected. Tool Offset Sensor BASE MASTER The most popular Base Master model with 1μm accuracy. Operates when a conductive circuit is completed. Sensor Plate For use with conductive cutting tools, workpieces, and machine tools. Measureable pressure Repeatability accurary Min. measurable tool diameter Battery life Height...

Open the catalog to page 5
MEASURING TOOLS - 6

MEASURING TOOLS TOOL MASTER TOOL MASTER is a precision touch sensor with a large dial gauge. LED lamp and sound pre-indicate approach to 100mm height to ease the detecting operation. Lamp (LED) Metric Dial Indicator Stroke range Height accuracy Measureable pressure Tool Offset Sensor For all materials, including non-conductive cutting tools,workpieces, and machine tools. Audible Beep Sensor Plate Audible BEEP Dial gauge Indication tolerance Return tolerance * Dial gauge accuracy in accordance with JISB7503:2011. ACCU CENTER ACCU CENTER is a simple and precise edge finder offering...

Open the catalog to page 6
MEASURING TOOLS - 7

MEASURING TOOLS ALIGNMENT TOOL for ATC arm For maintenance of machine tool spindle! Measuring equipment of misalignment between the ATC arm and machine tool spindle or magazine pot center. Dial indicator aids quick adjustment. How to use 1. Load the AL Shank in the machine spindle and mount the AL Flange on the ATC arm. 2. Insert the AL Plug into the AL Flange. 3. Rotate the AL Plug and read the highest and lowest values of the dial indicator. This direction is the eccentric direction. Half of the gap of the values is the eccentric amount. 4. Ajust the position of the ATC arm so that the...

Open the catalog to page 7
MEASURING TOOLS - 8

MEASURING TOOLS DYNA FORCE Measuring device for pulling force of machine tool spindle. The necessity of machine tool maintenance Belleville Springs Periodical measurement avoids reduced rigidity leading to vibrations, loss of machining quality, shortened tool life, etc. Longer taper shank to enhance reliability One common display can be used for all taper sizes. Long taper supports itself in long span and stabilizes the value of measurement. Exclusive case Measuring device Only one display for all taper sizes Taper size Rated capacity Each component is also available separately. Measuring...

Open the catalog to page 8
MEASURING TOOLS - 9

MEASURING TOOLS TOOL PRESETTER TYPE TPS Detects both X and Z axes with 1 stylus for various measuring applications. Ceramic spindle avoids damage such as indentation, buldge or corrosion on the taper. Precise taper contact is maintained. Measuring range Operating Min. reading Power supply temperature (mm) 1. Spindle provides zero setting reference. 2. Taper adapter and test bar are ordered separately. 3. HSK form E & F holders, which have no drive key slots, cannot be measured. COMPACT Type Operating Measuring range Min. reading Power supply temperature (mm) X : 0 - ø180 Z : 0 - 250 (BT30)...

Open the catalog to page 9
MEASURING TOOLS - 10

MEASURING TOOLS LEVEL MASTER 2-axis simultaneous detection leveler. LED displays level conditions for both axis simultaneously. LED and buzzer indication when leveling is complete. Audible BEEP Traditional method where 2 levelers are used Easy leveling with simultaneous 2-axis detection Simultaneous 2-axis detection saves the extra time & cost of using 2 levelers. Model Minimum Read Value Power Source 0.01mm Inclination/m Alkaline batteries (AAA x 4 pcs) 30 minutes after power is turned on Battery Life Operational Temperature 0-40°C(Recommended 20°C ± 5°) Dimensions Weight Level Master...

Open the catalog to page 10

All BIG DAISHOWA catalogs and technical brochures

  1. Accessories

    28 Pages

  2. Cutting tools

    37 Pages

  3. HSK shank

    52 Pages

  4. BDV / DV shank

    22 Pages

  5. BBT / BT shank

    72 Pages

  6. SURFACE MILL

    2 Pages

Archived catalogs

  1. Cutting tool

    37 Pages

  2. BDV/DV Shank

    22 Pages

  3. BBT/BT Shank

    72 Pages

  4. Index

    8 Pages

  5. Feature

    23 Pages