Sistema FOREVER BF205 Bieffe Srl Via Levato 1/1-1/3 61100 Pesaro Tel. 0039 0721281857 Fax 0039 0721281880 www.bieffeitalia.it [email protected] We have been creating and manufacturing steam generators and ironing boards for more than 20 years. We apply our knowledge and experience to several fields: sewing, household, catering, cosmetics, etc... Mr. Farinelli thanks you Information, descriptions and illustrations contained in this manual are not binding. BIEFFE maintains the right to introduce any necessary change. Gen. 2008 BIEFFE Company manufactures the whole range of its products in Pesaro using components made in Italy as well as entirely recyclable materials.

SISTEMA FOREVER The SISTEMA FOREVER is composed of an ironing board, with the possibility to lock the working surface, a steam generator and a professional iron. Such as all the other BIEFFE items, also for the SISTEMA FOREVER the boiler is made of copper; this allows to get rid of wear and tear problems and to save electricity, by reducing to a minimum waiting times. For servicing the boiler is provided with a tap which allows a whole draining. A reliable pressure gauge ensures the correct operating of the boiler. The appliance is also provided with a pressure switch that automatically checks...

GENERAL SAFETY INSTRUCTIONS ⇒ After the removal of the package make sure of the appliance’s integrity. In case of doubt do not operate the appliance but take it to a qualified service person for examination and repair. Plastic bags, polystyrene, etc…, must be kept out of the children’s reach. ⇒ Before connecting appliance, make sure that data on the plate are the same as the power supply network. ⇒ Plug appliance into grounded outlet of sufficient power as provided for by the safety regulations in force. ⇒ Do not touch appliance with wet or damp hands. ⇒ Always disconnect appliance from electrical...

CONTENTS AND LABELS Carton A: Pc. 1 Base complete with steam generator Pc. 1 Plastic tank 10Lt Pc. 1 Cord holder Carton B: Pc. 1 Ironing plate Pc. 1 Professional steam iron TROUBLESHOOTING IRON Fault: the iron switch does not light up when pressed. Cause: switch broken, power cord not properly inserted, lack of power supply. Action: replace switch, check power cord. Fault: after some minutes, the iron is still cold. Cause: iron switch is on OFF position, thermostat knob is set to a low temperature. Action: turn on iron switch, set thermostat knob to a higher temperature. If iron is still cold,...

A Ironing plate B Base with steam generator 1 Legs 2 Box cover 3 Wiring box 4 Clothholder 5 Vacuum pedal 6 Drining tap 7 Water tank 8 Refilling hose 9 General switch 10 Ironing plate thermostat 11 Boiler power cord 12 Iron power socie 13 Solenoid valve 14 Iron steam switch 15 Iron thermostat knob 21 Pressure gauge 22 Iron switch 23 Heating element switch 24 II Heating element switch 25 Safety cap

INSTALLATION AND STARTING UP ⇒ Stand the base (A) in a safe place. Pull out the legs (1) and put the ironing plate (B) on the base. ⇒ Screw the box cover (2) to the wiring box (3). ⇒ Lower the clothholder (4). Insert the cordholder in its support on the wiring box and place the pedal (5). ⇒ Connect the boiler cable power (11) to the power socket behind the wiring box. Connect the iron cables to the iron power socket (12) and to the solenoid valve (13). ⇒ To operate the vacuum motor push the pedal (5). ⇒ When there is no water in the boiler a pump will take the water from the external tank to...