*mydirectindustry

MAXI VAPOR

Product catalog summary

Introduction
Bieffe Srl, based in Pesaro, Italy, has over 20 years of experience in manufacturing steam generators and ironing boards. The MAXI VAPOR steam generator with a professional iron is designed with innovative technical principles, featuring a copper boiler with an external heating element for durability, quick pressure build-up, and energy efficiency.

Specifications
The MAXI VAPOR is available in two models: cod.BF004 (white) and cod.BF003 (stainless steel). It is made entirely in Italy using recyclable materials.

Operating Instructions
1. Plug the boiler into a grounded outlet.
2. Turn on the iron and boiler switches. For dry ironing, only the iron switch is needed.
3. Set the thermostat to the desired temperature. Use a Teflon shoe to prevent fabric shine.
4. Wait for the steam ready indicator or pressure gauge to signal readiness.
5. Press the red thumb switch for steam, and adjust the steam flow with the black knob.
6. Refill the boiler when the water level is low, following safety instructions.
7. After use, turn off switches, unplug, and store in a dry place.

Troubleshooting
Iron Issues:
- Iron switch not lighting: Check switch and power cord.
- Iron not heating: Ensure switch is on and thermostat is set correctly.
- High temperature: Adjust or replace thermostat.
- Water or wet steam: Increase thermostat setting or replace thermostat.
- No steam: Check coil, switch, and power cord.
Boiler Issues:
- No steam ready light: Check heating element and pressure switch.
- Little steam: Refill boiler after reading safety instructions.

Maintenance
To empty the boiler, release pressure by unscrewing the safety valve cap slightly. Once cool, drain the water. This should be done monthly or before long periods of inactivity.

General Safety Instructions
- Ensure appliance integrity before use.
- Keep out of children's reach.
- Use only with the correct voltage and grounded outlets.
- Disconnect when not in use and before maintenance.
- Repairs should be conducted by qualified personnel using original parts.

Consumer Notice
The product complies with Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). Dispose of it through local WEEE facilities.

Setting Up: Filling the Boiler
Before ironing, check the water level. To fill, ensure the appliance is unplugged and pressure is released. Use a funnel to add water, avoiding spills. Two liters allow for three hours of ironing.

Catalog excerpts

MAXI VAPOR Bieffe Srl Via Levato 1/1-1/3 61100 Pesaro Tel. 0039 0721281857 Fax 0039 0721281880 www.bieffeitalia.it [email protected] We have been creating and manufacturing steam generators and ironing boards for more than 20 years. We apply our knowledge and experience to several fields: sewing, household, catering, cosmetics, etc... Mr. Farinelli thanks you ⁪ cod.BF004 white ⁪ cod.BF003 stainless steel Information, descriptions and illustrations contained in this manual are not binding. BIEFFE maintains the right to introduce any necessary change. July. 2009 MADE IN ITALY. The whole BIEFFE production is made in Pesaro. Components produced in Italy and recyclable materials are used

Open the catalog to page 1

Congratulations on choosing the quality and reliability of our products. The patented steam generator MAXI VAPOR with professional iron is based on the application of new technical principles. The copper boiler with external heating element has the following advantages: => it does not wear out => it gets to pressure very quickly thereby effecting a considerable saving energy => all water contained in the boiler can be utilized. The complete emptying out of the boiler allows an accurate cleaning. Precise devises (thermostat, pressurestat, max. pressure valve) guarantee the maximim safety by controlling...

Open the catalog to page 2

=> Plug the boiler into grounded outlet of sufficient power. => Turn on iron switch (3) and boiler switch (4). For dry ironing turn on only iron switch. => Set the thermostat knob (5) to desired temperature. With high temperatures you run the risk of burning the garment or obtaining an undesired shine effect on the fabric. The use of anti-shine Teflon shoe will eliminate this problem. => After about 10 minutes, when the steam ready indicator lamp (6) lights up, or the pressure gauge (7) reads more than 2 bars, you are ready to iron. During ironing, this light will go on and off, depending on...

Open the catalog to page 3

Cord holder General/iron switch Boiler switch Thermostat knob Steam ready indicator lamp Pressure gauge Steam switch Pc.1 Steam generator MAXI VAPOR complete with professional steam iron Pc.1 Cord holder Pc.1 Iron mat Steam flow knob 8 4 7 CAUTION DO NOT REMOVE SAFETY DEVICE AND PROTECTIVE COVER BEFORE MAINTENANCE AND SERVICE MAKE SURE THAT APLLIANCE IS UNPLUGGED FROM ELECTRIC OUTLET AND BOILER IS COOL AND NOT UNDER PRESSURE. CONSUMER NOTICE: The BIEFFE product you have purchased is subject to Directive 2002/96/EC of the European Parliament and the Council of the European Union on waste electrical...

Open the catalog to page 4

MAXI VAPOR

MAXI VAPOR

Catalog excerpts

All Bieffe italia catalogs and technical brochures