MAXI VAPOR PLUS
4Pages

MAXI VAPOR PLUS Bieffe Srl Via Levato 1/1-1/3 61100 Pesaro Tel. 0039 0721281857 Fax 0039 0721281880 www.bieffeitalia.it info@bieffeitalia.it We have been creating and manufacturing steam generators and ironing boards for more than 20 years. We apply our knowledge and experience to several fields: sewing, household, catering, cosmetics, etc... Mr. Farinelli thanks you MADE IN ITALY. The whole BIEFFE production is made in Pesaro. Components produced in Italy and recyclable materials are used. Information, descriptions and illustrations contained in this manual are not binding. 8 BIEFFE maintains the right to introduce any necessary change. May 2010

TROUBLESHOOTING GENERAL SAFETY INSTRUCTIONS After the removal of the package make sure of the appliance’s integrity. In case of doubt do not operate the appliance but take it to a qualified service person for examination and repair. Plastic bags, polystyrene, etc…, must be kept out of the children’s reach. Before connecting appliance, make sure that data on the plate are the same as the power supply network. Plug appliance into grounded outlet of sufficient power as provided for by the safety regulations in force. Do not touch appliance with wet or damp hands. Always disconnect appliance...

nough to make this operation once a month. WHEN FINISHED WORKING, TURN OFF ALL THE SWITCHES, UNPLUG THE APPLIANCE AND KEEP IN A DRY PLACE. MAINTENANCE: HOW TO EMPTY THE BOILER => Unscrew the safety valve cap half a turn to release all pressure in the boiler. When the boiler is cold and unpressurized open the cap and pour out water from the boiler. => It is not necessary to pour out all remaining water any time you finish ironing. It is enough to make this operation once a month. => Be sure to empty the boiler in case of long time of inactivity. => Unscrew the safety valve cap half a turn to...

SETTING UP: HOW TO FILL (AND REFILL) THE BOILER Before starting to iron, check the water level in the boiler. In case you need to fill the boiler, make sure the appliance is unplugged. UNSCREW THE SAFETY VALVE CAP HALF A TURN TO RELEASE ALL PRESSURE IN THE BOILER. When there is no pressure left and boiler is cool, remove the safety valve cap by turning it counterclockwise, slowly. Pour tap water into the boiler using a funnel. 1 liters of water enable you to iron for 1,5 hours. It is advisable to add less water if you do not have much to iron: the boiler will take shorter to get to...