MAGIC VA P O R Bieffe Srl Via Costa Fagnano, 3 61122 Pesaro Tel. 0039 0721281857 Fax 0039 0721281880 www.bieffeitalia.it [email protected] We have been creating and manufacturing steam generators and ironing boards for more than 20 years. We apply our knowledge and experience to several fields: sewing, household, catering, cosmetics, etc... Mr. Farinelli thanks you Information, descriptions and illustrations contained in this manual are not binding. BIEFFE maintains the right to introduce any necessary change. March 2012 MADE IN ITALY. The whole BIEFFE production is made in Pesaro. Components produced in Italy and recyclable materials are used.

STANDARD ACCESSORIES GENERAL SAFETY INSTRUCTIONS Cod. MGL PVC Steam brush d.20 for MGK04 (upon request, available: STEEL, BRONZE AND BRISTLE) After the removal of the package make sure of the appliance’s integrity. In case of doubt do not operate the appliance but take it to a qualified service person for exaexamination and repair. Plastic bags, polystyrene, etc…, must be kept out of the children’s reach. Before connecting appliance, make sure that data on the plate are the same as the power supply network. Plug appliance into grounded outlet of sufficient power as provided for by the safety...

MAINTENANCE: HOW TO EMPTY THE BOILER => UNSCREW THE SAFETY VALVE CAP HALF A TURN TO RELEASE ALL PRESSURE IN THE BOILER. When the boiler is cold and unpressurized, open the cap and pour out water from the boiler. => It is not necessary to pour out all remaining water any time you finish ironing. It is enough to make this operation once a month. => Be sure to empty the boiler in case of long time of inactivity. => machine and pour out the water from the boiler. => It is not necessary to pour out all remaining water each time you finish cleaning. Do the the emptying/cleaning operations once a month...

Cord holder Safety cap Steam inlet Steam outlet Power cable General switch Heating switch Thermostat knob Steam ready lamp 10 Pressure gauge 11 Steam flow knob 12 Steam switch 13 End of water indicator lamp SETTING UP: HOW TO FILL (AND REFILL) THE BOILER => Before starting to iron, check the water level in the boiler. In case you need to fill the boiler, make sure the appliance is unplugged. => UNSCREW THE SAFETY VALVE CAP 2 HALF A TURN TO RELEASE ALL PRESSURE IN THE BOILER. When there is no pressure left and boiler is cool, remove the safety valve cap by turning it counterclockwise, slowly. =>...