DX AIR CURTAIN
28Pages

Complete climate system Since 2006 Biddle and Daikin have joined forces to provide a complete climate system for shops and public buildings. By combining Biddle air curtains with the highle efficient Daikin heat pump systems, a lot of energy is saved and comfort in the building is optimum. Maximum comfort Both visitors and personnel can enjoy maximum comfort during the whole year, under all weather conditions. This is the result of the efficient climate separation created by Biddle air curtains, while heat pump systems heat, cool or ventilate to provide a comfortable indoor climate....

A new wave in climate separation SensAir air curtains are the ideal solution for retailers and other end-users to combat the issue of climate separation across their outlet or office building doorway. The importance of accessibility to attract customers in the retail sector is well-known, but with this free form of access through ‘open door’ trading, cold draughts and high-energy bills are often the consequence. High comfort and energy efficient Intelligent auto-active control and monitoring The SensAir technology has been improved to deliver greater comfort for all, whether it is in a...

Energy-efficient climate concept Biddle and Daikin supply a complete plug & play climate concept. Within this energy-efficient climate concept two different versions are available: the SRV and SRQ models. Complete SRV air curtain – climate system The climate system consisting of the SensAir air curtain, model SRV (1), Daikin VRV outdoor unit (2) and indoor units (3) supplies heating, cooling, ventilation and climate separation in one energy-efficient installation. By heating and cooling at the same time the heat extracted from the cooling systems can be extracted for the air curtain, thus...

SensAir auto-active control Intelligent control and monitoring There are an extensive range of control options; touchscreen control (b-touch), remote operation and integration with a Building Management System (BMS). It is possible to monitor the energy performance and comfort levels remotely by means of the bconnect monitoring module. Connecting to a BMS is easy through a standard Modbus Protocol connection, whilst it is also possible to communicate via BACnet. All SensAir devices are fitted with Biddle's innovative auto-active control, the next generation of controls. Auto-active control...

SensAir selection Air curtain selectio Selecting the right air curtain is crucial in order to ensure the SensAir works optimally. An air curtain performs properly when it completely shields the doorway and is strong enough to heat the cold air streaming in from outside to a comfortable temperature Air curtain product selector The selector enables a simple selection of the most appropriate product for your entrance and depends on: « Door height: mounting height, measured from floor to bottom of unit. « Door width: recommended unit overhang - minimum of 100mm each side. • Natural ventilation:...

SensAir possibilities The SensAir has endless possibilities. The SensAir creates optimum climate separation in all doorways and is also suitable for Daikin systems. There is a solution available for many monitoring and control options. For the water, electrical, hybrid and ambient versions a separate brochure is available. For every door width Doors wider than 250 cm are covered by placing multiple units next to each other. Control options . Auto-active control with b-touch control panel . b-connect monitoring module > Modbus communication Daikin • DX: Direct expansion • SRQ S-100 not...

SensAir delivery and accessories Technologies • i-sense infrared technology to collect accurate temperature data In the door opening • CHIPS technology to adjust the settings automatically . Controlled air strength technology for the best downward penetration • Rectifier technology to reach the floor at the lowest possible speed DX version For a complete installation of model SRV or SRQ several additional components to be delivery by Daikin are necessary. Standard delivery . Modbus communication • Air filters • Ceiling mounting brackets • Duct connections R-model (ducts not included)...

SensAir connections Electrical connections The SensAir is delivered as standard with the b-touch control panel and i-sense infrared technology. It is also possible to specify the optional b-connect monitoring module or communicate via Modbus, the latter of which is a standard feature on all units. 1. i-sense infrared technology 2. b-touch control panel 3. b-connect monitoring module 4. Modbus communication

Specifications Casing The casing is made of zinc plated sheet steel, and has an inspection panel in the bottom. The inlet grilles are made of anodised aluminium with fixed fins. The inlet module and the end panels as well as the casing are, as a standard, supplied in silver grey (RAL 9006) or traffic white (RAL 9016). The end panels of the white SensAir have a grey inlay. Other RAL casing colour finishes are available for an additional charge. Motor / Fan assembly The air curtain is equipped with two or more (depending on type) dual-inlet, vibration free suspended centrifugal fans. Each fan...

SensAir DX explanation of technical data Because of the auto-active control of the SensAir DX air curtain the outlet temperature varies at all speeds, depending on the situation. The maximum heating capacity of the DX air curtains is the same as the heating capacity in the highest fan speed. Selection Daikin outdoor unit To determine the correct Daikin outdoor unit for model SRV, you need to add together the capacity indexes of all the indoor units. Sound The sound data is based on the direct field, in a situation with | Closed door + 1 a 2 dB(A) an open door and a sound absorbing ceiling....

SensAir technical data

SensAir technical data

SensAir technical data

SensAir technical data

SensAir technical data

SensAir technical data