Introduction
The document introduces the ROKEN S2000, a high tension steel plate correspondence re-sharpening machine, designed to sharpen Gekkou Kintaro spot weld drill bits. These drill bits are specifically engineered to drill through high tensile body panels.

Specifications
- Applicable Diameters: 6.5mm to 10.0mm
- Motor Output: 65W
- Power Supply: AC100V 50/60Hz
- Net Weight: 8 kg
- Overall Dimensions: W230xD230xH225mm
- Grinding Wheel: CBN #170
- Collet Sizes: Φ6.5mm, Φ8.0mm, Φ8.2mm, Φ9.0mm

Standard Accessories
- Holder ring
- Hexagon wrench

Operation Procedure
The ROKEN S2000 is user-friendly and operates in three simple steps:
1. Insert the dull drill bit into the jig to set it for sharpening.
2. Perform the first grinding operation.
3. Complete the final grinding for a sharp finish.

Performance
The Gekkou Kintaro drill bits, when sharpened with the ROKEN S2000, can drill 15 to 20 holes compared to 1 to 1.5 holes by other companies' bits, at a rotation speed of 1,000 to 1,200 rpm.

Manufacturer Information
- Address: 38, Hiezu Hiezuson Saihakugun Tottori #689-3553 JAPAN
- Phone: +81-859-27-1231
- Fax: +81-859-27-2808
- Email: [email protected]
- Website: www.bictool.com

Note
Specifications and appearance are subject to change without notice to enhance safety and quality.