DESCRIPTION Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO-type fabric, the fiberglass mesh weighing 90 g/m2 gives strength in the mass of the spacing and is used as a reinforcement element for surfaces with a thin layer of plaster. ✓ Fiberglass mesh with a weight of 90 g/m2 is used as a reinforcement element for interior plaster on vertical and horizontal surfaces; ✓ Is used, in particular, when the finish is gypsum-based and in the case of interactions between materials with different coefficients of expansion, evenly distributing the stresses to which they are subjected. Appearance of fiberglass mesh SR EN ISO 7823 Dimensions - material width SR EN ISO 7823 Dimensions - material length SR EN ISO 7823 Total weight per unit area SR 137-95 Tensile strength under normal storage SR EN conditions 13496:2014 Tensile strength under normal storage SR EN conditions 13496:2014 Elongation at break under normal SR EN Elongation at break under normal SR EN Tensile strength after 24 hours in SR EN Tensile strength after 24 hours in SR EN UNITS TOLERANCE VALUES without visible physical defects initial tensile initial tensile 610094 - Petru Movila nr. 31 Piatra Neamt, Romania

Fire reaction class F (without determined performance) *MD = Machine Direction; CMD = Cross Machine Direction; CERTIFICATIONS Manufacturer BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and ISO 45001 AEROQ certificates. CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, the fiberglass mesh...