Fanless Delivery Operation Extended 60 Watt  Supercap DC UPS with wide-range input 16…32 V DC and uninterruptible 12 V DC output  Maintenance-free  High cycle stability > 500 000  Charge time <60 sec at maximum charge current  Extended temperature range -20…+70 °C  Compact design  Active reverse polarity protection  Power Fail signal via relay, RS232 connection Te c h n i c a l d a t a Input voltage Input current Output power Output voltage Output current Output ripple Efficiency Charge current Charging method Storage type Charging time Backup time Protection Temperature Humidity Dimensions (W x D x H) Weight (net) 24 VDC (16…32 V DC) 2.8 A nom. 60 W 12 VDC ±2 % 5A ≤30 mV 94 % typ. Depending on load up to 5 A CC Supercaps 4x 100 F <60 sec at maximum charge current See diagram Overcurrent protection – Non LATCH Active reverse polarity protection Operating: -20…+70 °C / Storage: -20…+70 °C Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 135 x 79.5 x 35 mm incl. supercaps 0.17 kg DC UPS Bicker Elektronik GmbH | 86609 Donauwörth | German

UPS systems Optional Accessories   detailed information please visit our website www.bicker.de and refer to the article number. For PSZ-1036 | Input cable 3-pole, length 500mm, AWG 18, ends open 2-pole, length 500mm, AWG 18, ends open green black Interface cable for UPSIC and DC2412, PSZ-1046: IDC 2.0 to SUB-D 9 pin female, PSZ-1048: IDDC 2.0 to IDC 2.54 For UPSIC and DC2412-UPS (-LD), PSZ-1043: TP connector wire open end, PSZ-1044: TP connector wire 2.54 mm Efficiency curve Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 |

UPS systems EMC curves Path 0 EN 55022 Class A Conducted QPEAK Level (dBuV) EN 55022 Class A Conducted QPEAK Level (dBuV) Measurement conditions Vin = 24 V Iout = 5 A full load Tamb: 21 °C Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de

UPS systems Backup time 180 sec. 170 sec. 160 sec. 150 sec. 140 sec. 130 sec. Application example with mITX Board IMB-154 (see parameters below) Backup time Output current Parameters of the test system for the backup curve Board RAM ROM OS Test Software Test results 1x mSATA 32 GB Type: CIE MSM300M JB032GS SN: CIE164905767 Microsoft Windows 10 Enterprise Evaluation Version 1511 Build 10586.589 (2016/09/16) BurnInTest V7.1 Pro 100 % load: 1 min. 43sec. = 103 sec Software UPS Control Center UPS Control Center The UPS software is available for free download directly on the product page at www.bicker.de....

Drawing DC2412-UPS Relay contact for Power Fail Power Fail = 0 Q 0.5 A @ 125 VAC 1 A @ 24 VDC 04 RTS signal (Supply voltage, max. 12 V) 06 CTS signal (Low = Power Fail; High = Power OK) RELAY WR-691210910002 LED D302 RED Caps charging state < 90% D301 RED Power fail, backup mode D201 GREEN Normal mode Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de

UPS systems Interface schematic J301 J301, PIN1 (DCD ON PC OR HOST) CABLE CONNECTED R346 4k7 J301, PIN4 (RTS ON PC OR HOST) USED AS SUPPLY J301, PIN2 (DSR PC OR HOST) CAPS CHANGE STATE High CAP<90% J301, PIN6 (CTS ON PC OR HOST) Power Fail Low Internal connection Power Fail High Low CAP <90% Internal connection High CAP >90% or Full Charged Specification is subject to change without notice. Errors excepted. Status as at: 20.11.2018 Recommended power supplies from Bicker Elektronik   Additional recommendations on www.bicker.de BET-0924-T BET-1024M BED-12024 BEN-10024 90 Watt 100 Watt 120 Watt...