*mydirectindustry

DC160W

Product catalog summary

Specifications:
The DC160W is a 160 Watt ATX DC/DC converter with an ultra-wide input range of 6 to 36 V DC and an extended temperature range of -20 to +70 °C. It boasts an efficiency of up to 93% and includes a motor vehicle ignition function. The design is robust, requiring no minimum load, and includes a thermal pad for chassis mounting, enhancing thermal performance.

Electrical Characteristics:
Input voltage is 24 V DC with a maximum input current of 7.2 A. The inrush current is capped at 20 A. Standby consumption is less than 1 W. The unit provides a Power-Good-Signal with a switch-on delay of 100 to 500 ms and a switch-off delay of 3.5 ms. Protection features include inverse-polarity protection at the input and short circuit, overvoltage, and overtemperature protection at the output.

Output Specifications:
The converter provides multiple output voltages: +3.3 V, +5 V, +12 V, -12 V, and +5 Vsb, with varying current capacities and regulation tolerances. Ripple and noise levels are specified for each output.

Physical and Environmental Specifications:
The unit measures 160 x 45 x 24 mm and weighs 0.23 kg. It operates within a humidity range of 10 to 90% RH and can be stored in conditions of 10 to 95% RH. The MTBF is approximately 990,000 hours at 50 °C.

Installation and Operation:
Maximum output power is 160 W when connected to a heatsink or metal housing, and 100 W with free mounting. The unit must not be operated unassembled and should comply with EMC standards. Various jumper settings allow for different ignition functions and power modes.

Optional Accessories:
Accessories include an EMC filter and DC input wire. A cable management system is available with model DC161W.

Additional Information:
For detailed specifications and application notes, refer to the manufacturer's website. Custom assembly options are available upon request.

Catalog excerpts

Industrial PC power suppl' © ATX DC/DC converter © Ultra wide input range 6...36 VDC © Extended temperature range -20...+70 °C © Efficiency up to 93 % © With motor vehicle ignition function © No minimum load required © Very robust design © Inclusive thermal pad for chassis mounting © Excellent thermal performance when chassis mounted due to power components on bottom side © Maximum reliability and long life time due to high quality components Technical data Input voltage Input current Inrush current Efficiency Standby consumption Power-Good-Signal Protection Insulation voltage Temperature Derating MTBF Humidity Dimensions (W x D x H) Weight (net) 24 V DC (6...36 VDC) Max. 7.2 A (24 VDC) 20 A max. (24 VDC) App. 93 % <1 W Switch on delay 100.500 ms / Switch off delay 3.5 ms Input: Inverse-polarity protection Output: Short circuit protection: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb Overvoltage protection: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb Overtemperature protection: Depends on ambient temp., load and cooling No separation between input / output Operating: -20...+70 °C / Storage: -20...+85 °C See diagrams App. 990 000 h according to Telcordia SR-332 at +50 °C Operating: 10.90 % RH, non-condensing / Storage: 10.95 % RH, non-condensing 160 x 45 x 24 mm ±0.5 mm 0.23 kg Article Output Output current Load Ripple & No. voltage min max peak regulation Noise Max. output power is 160 W with connection to heatsink/metal housing (thermal resistance: <6K/W) and 100 W with free mounting (24 V /<55 °C). All measurements were performed with an aluminum heat sink (180x55x 3 mm) and heat transfer pad (included) at 25 °C. At input voltages 6...10 V and/or temperatures >55 ° C both diagrams must be considered. Peak output current can be for max.. 1 sec within 1 minute. No galvanic isolation! Ripple and noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 10 jof and 0.1 jof capacitors at each output. This unit is for assembly purposes only and it must not be operated in unassembled conditionThe final assembly has to comply with the valid EMC standards. Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de

Open the catalog to page 1

Industrial PC power supplies Optional Accessories  detailed information please visit our website www.bicker.de and refer to the article number. For PSZ-1040 | EMC Filter Length 350 mm, max. 5 A, thread plug, 5.5 x 2.5 mm Reduces conducted noise and emission Derating Input voltage derating Output power — Derating at convection cooling and connection to heat sink or metal housing with thermal resistance of < 6K/W — Derating at convection cooling and free mounting Temperature derating Output power* *Percentage refers to power of input voltage derating Bicker Elektronik GmbH | 86609 Donauwörth...

Open the catalog to page 2

Industrial PC power suppl'Drawing DC160W Tolerance: ±0.5 mm 160.0 mmThe following modes for ignition functions are selectable by jumper: J4 Jumper attached © 5 Vsb Hard-off: In case battery voltage falls below the listed„Switch Off" voltage for 1 minute or longer, the DC 160 W automatically shuts down (deep discharge protection): Mode P1-P10 Switch Off @ 11.0 V - Start @ 12.0 V Mode P11-P12 Switch Off @ 10.5 V - Start @ 10.8 V Mode P13-P14 Switch Off @ 10.7 V - Start @ 11.3 V Switch Off @: Separation of the application from 5Vsb during the Hard-off time when the voltage drops below the specified...

Open the catalog to page 3

Industrial PC power supplies Cable harness DC160W YELLOW YELLOW YELLOW YELLOW BLACK RED RED RED NC BLACK BLACK BLACK GREEN BLACK BLUE ORANGE ORANGE BLACK RED BLACK A YELLOW 1 BLACK BLACK BLACK BLACK ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED BLACK ORANGE ORANGE ORANGE BLACK RED BLACK A YELLOW 1 RED BLACK BLACK YELLOW YELLOW BLACK BLACK RED  INFORMATION For cable management system, see our model DC161W Specification is subject to change without notice. Errors excepted. Status as at: 17.02.2020  SPECIAL DESIGN We are glad to assemble for you special requests such as Phoenix Contact...

Open the catalog to page 4