 Long-life battery pack  High reliability  Safe lithium iron phosphate technology  100 % free of lead and cadmium  Extended temperature range  High performance BMS system  Advanced charging algorithms and cell balancing  Battery relax mode for lifetime extension  Integrated protection against deep discharge, over current, over voltage and short circuit  Compact shrink tube version  UN 38.3 transportation certification Te c h n i c a l d a t a Nominal capacitance Technology Life cycles Temperature Communication 7500 mAh LiFePO4 (Lithium iron phosphate) > 6000 Operating: -20…+55 °C / Storage: -30…+55 °C SMB Product specific data Nominal voltage Number of used cells Charge voltage Charge current Discharge current Dimensions (Wx D x H) Operating: 10…90 % RH, non-condensing Storage: 10…80 % RH, non-condensing Nominal backup time, measured at +21 °C 50 W BP-LFP-1375 ~ 99 min Back up time depends on battery capacitance, load and temperature. At very high or low temperatures a reduction of backup time occurs. Bicker Elektronik GmbH | 86609 Donauwörth |

UPS systems Optional Accessories   detailed information please visit our website www.bicker.de and refer to the article number. For PSZ-1075 | Mounting bracket Mounting bracket for BP-LFP-1099/1375, 2-pices set SMBC SMBD SYSPRES SGND Tolerance: Cable: ±5mm / Battery pack: ±2mm Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected]

UPS systems Backup time BP-LFP-1375 nominal backupNominal over output PPower, calculated, 21°C time backup time vs. (calculated @ 21°C) out DC UPS Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www

UPS systems BP-LFP – LiFePO4 cell specifications SPECIFICATION Nominal Voltage Nominal Capacity Maximum discharge current - continuous (A) Recommended standard charge Recommended fast charge Recommended float charge voltage Recommended end of discharge cutoff Absolute maximum cell temperature 85 ° C (measured at cell surface) Nanophosphate® Chemistry Current Interrupt Device (CID) BP-LFP – Battery voltage and current during recharge VoltageCurrent Voltage & & Current Charger holds output to a steady „float“ voltage Battery Voltage Charger holds a steady constant current output Battery Current...

UPS systems BP-LFP – Cycle life at various temperatures Capacity fade (% of BOL capacity) 100 % Cell Type: 2.5 Ah cylindrical Cell cycles / year: 363 kWh / year: 2.72 SOCavg: 57.5 % Cycle number BP-LFP – Calendar life at various temperatures Capacity fade (% of BOL capacity) Specification is subject to change without notice. Errors excepted. Status as at: 08.07.2021 Time (year) Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | info@bicker