BEP-520H
1 / 3Pages

Catalog excerpts

Industrial PC power suppl' r © 150 Watt continuous fanless power! © Temperature range -10...+70 °C © Excellent voltage regulation © EN/UL 62368-1 certified © No minimum load required © Powerful 5 Vsb (3 A) Technical data Input voltage Input frequency Input current Inrush current Efficiency Standby consumption Hold up time Power-Good-Signal Protection Earth leakage current Safety / EMC Temperature Derating MTBF Max. operating altitude Humidity Dimensions (W x D x H) Weight (net) 90.. .264 VAC, active PFC 47.. .63 Hz 3 A (115 VAC) / 1.5 A (230 VAC) 35 A (115 VAC) / 80 A (230 VAC) >83 % (at full load and 230 VAC) App. 1.5 W >100 ms at 115 VAC and full load Switch on delay 100.550 ms, Switch off delay 1 ms Short circuit protection: At each output, switch off Overload protection: 130.170 %, switch off Overvoltage protection: Switch off, +3.3 V (3.6.. .4.3 V), +5 V (5.6.. .6.5 V), +12 V (13.2.15 V) Overtemperature protection: Switch off <3.5 mA TUV, UL, CCC, CE, EN55022 Class A (with filter PSZ-1019: class B), EN/UL62368-1 Operating: -10.+70 °C / Storage: -20.+80 °C From +40.+70 °C, 1.33 % / °C (With cover: +35.+70 °C: 1.3 % / °C) 172700 h according to MIL-HDBK-217F, Notice 2 at +50 °C 5000 m Operating: 10.85 % RH, non-condensing / Storage: 10.90 % RH, non-condensing 100 x 186 x 39.5 mm ±0.5 mm 0.96 kg Output power at +3.3 V, +5 V, + 12 V and-12 V is 135 W without fan, 185 W with 15CFM fan. Output power at +3.3 V and +5 V is 50 W without fan, 70 W with 15CFM fan. 150 W power can be supplied without fan, and 200 W full power using a 15CFM fan. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards. Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

Open the catalog to page 1

Industrial PC power supplies Optional Accessories  detailed information please visit our website www.bicker.de and refer to the article number. For X1-061 | AC input cable 2-pole, length 620 mm, AWG18, ends open 3-pole, length 600 mm, AWG18, ends open, M3 ring terminal 3-pole, length 610 mm, AWG18, ends open, M4 ring terminal For BEP-520H, inclusive mounting screws and isolationpads IEC connector filter incl. cable and ferrite Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | info@bicker.de | www.bicker.de

Open the catalog to page 2

Industrial PC power supplies Drawing BEP-520H AC input M3x0.5(x4) screw with max. 4 mm thread length Specification is subject to change without notice. Errors excepted. Status as at: 22.07.2019 BLACK RED RED RED NC BLACK BLACK BLACK GREEN BLACK BLUE ORANGE RED BLACK BLACK YELLOW RED BLACK BLACK YELLOW ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED BLACK ORANGE ORANGE YELLOW BLACK BLACK RED ORANGE BLACK RED BLACK A1 YELLOW ORANGE BLACK RED BLACK A1 YELLOW Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | info@bicker.de | w

Open the catalog to page 3

BEP-520H 1 / 3Pages

Catalog excerpts

All Bicker Elektronik GmbH catalogs and technical brochures

BEP-520H
1 / 3Pages