Medical applications  300 W continuous fanless power  Very compact design  High power density  High efficiency up to 94 %  Adjustable output voltage  Remote sense function  PS on/off Remote Control  Power good and Power fail signal  +5V Standby output  Low Standby consumption: <0.3 W  Wide temperature range -40…+70 °C Extended Delivery Medical Delivery Fanless Medical Also available as open frame model Art. No. BEO-3000M Input voltage Input frequency Input current Inrush current Efficiency Standby consumption Hold up time Protection Insulation voltage Insulation resistance Line regulation Load regulation Earth leakage current Touch Current Safety/EMC Temperature Derating Max. operation altitude MTBF Humidity Dimension (W x Dx H) Weight (net) 90…264 V AC (100…240 V AC nominal), active PFC 47…63 Hz (50…60 Hz nominal) 5 A (100 V AC) / 2 A (240 V AC) <30 A (240 V AC) 92.5…94 % depending on model <0.3 W at 0 A load App. 20 ms (115 VAC) Short circuit protection: switch off with auto recovery Overtemperature protection: switch off with auto recovery Overvoltage protection: switch off Input / Output 6516 V DC (2 x MOPP), Output / FG: 2122 V DC, Input / FG: 2122 V DC 100 MΩ ±0,5 % at rated load and input voltage change from 90 to 264 V AC ±1 % (5 Vsb : ±5 %) <300 µA @ 264 VAC/ 60 Hz <100 µA @ 264 VAC/ 60 Hz IEC60601-1:2005+A1:2012 (Edition 3.1), EN60601-1:2006+A1:2013 (Edition 3.1), ANSI/AAMI ES60601-1:2005 (3rd Edition), CE Operating: -40…+70 °C / Storage: -40…+85 °C See diagram 3000 m >167 000 h according to MIL-HDBK-217F at +25 °C / 115 V AC Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 88 x 136 x 40.4 mm ±1 mm (3.46 x 5.35 x 1.6“) 0.56 kg Product specific data Remote sense Adjustment range output voltage (VR) PS_ON PG (Power Good) Adjustment range 0.5 V (CN5) ±5 % ATX compatible (CN4), Power on via jumper from PIN5 to PIN6 Power ON „low“ ≤2 V, Power OFF „High“ 11…16 V, open circuit PS_ON and GND short: IPS_ON = 4.5 mA typical ATX compatible, 50…250 ms, CN5 Bicker Elektronik GmbH | 86609 Donauwörth | Germa

Article Output Output Output current Ripple & Efficiency No. I voltage min max load (fanless)* Noise * 300W continuous power faniess with minimum input voltage 220VAC (see derating diagrams). Ripple and noise was measured by a 20MHz bandwidth limited oscilloscope with connected 0.1pF and 10pF capacitors at the output. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards. [>[>[> For detailed information please visit our website www.bicker.de and refer to the article...

Power supplies Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de

Medical applications Drawing BEO-3000MC Tolerance ±1 mm Specification is subject to change without notice. Errors excepted. Status as at: 06.07.2020 Input connector (CN1): VHR-3N or similar Output connector: Screw terminal M3 Output connector CN4 wafer with JST PH series and mate with JST housing PH series or equivalent. Also available as open frame model Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de Power supplies cross secti