BEO-0800 80 Watt vd_I_d ©80 W continuous fanless power on 2 x 4" ©150 W power with forced air cooling © Very compact design © Efficiency up to 91 % © Wide temperature range -20...+70 °C © +12 V fan output (0.3 A max.) © Operating altitude 5000 m © Safety approved to IEC/EN/UL62368-1 Industry Technical data Input voltage Input frequency Input current Inrush current Efficiency Standby consumption Hold up time Protection Insulation voltage Line regulation Load regulation Leakage current Safety / EMC Temperature Derating MTBF Max. operating altitude Humidity Dimensions (Wx D x H) Weight (net) 90.. .264 VAC (100.. .240 V AC nominal), active PFC 47.. .63 Hz (50.60 Hz nominal) <1.5 A (115 V AC), <0.75 A (230 V AC) <40 A (115 V AC), <80 A (230 VAC) Up to 91 % (see diagram) <0.37 W (230 V) / <0.48 W (115 V) >10 ms Short circuit protection Overcurrent protection Input/output 4 kVDC, Input/FG: 2 kV DC ±2 % ±2 % <3 mA IEC/EN/UL62368-1, EN55032: Class B Operating: -20.. .+70 °C / Storage: -20.. .+85 °C See diagram 300 000 h according to Telcordia SR-332 issue 3 5000 m Operating: 10.85 % RH, non-condensing / Storage: 10.90 % RH, non-condensing 50.8 x 101.6 x 34.5 mm ±1 mm 0.194 kg * 80 W max. fanless *2 150 W max. with 20 CFM fan Ripple and noise was measured by a 20MHz bandwidth limited oscilloscope with connected ipF and i0pF capacitors at the output. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards. Note: The device has to be mounted on a metal plate! Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de

Power supplies Optional Accessories   detailed information please visit our website www.bicker.de and refer to the article number. For X1-054 | AC input cable 2-pole, length 600 mm, AWG18, ends open 3-pole, length 600 mm, AWG18, ends open 4-pole, length 600 mm, AWG18, ends open Start at temperatures below 0 °C can cause higher ripple Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected]

Power supplies Efficieny curves BEO-0800 (at +25 °C) 12 V Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.

Specification is subject to change without notice. Errors excepted. Status as at: 22.11.2019 NOTE: The device has to be mounted on a metal plate! CAUTION: Please remove foil from gap pad before mounting! Toie.mnce± 1mm Quantity Description Bicker Elektronik GmbH | 86609 Donauworth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de