*mydirectindustry

BEA-750H

1 / 4 PagesView full catalog

BEA-750H

Product catalog summary

Specifications:

Power Output: 500 Watts with additional +24 V DC output.
Efficiency: Up to 91%.
Input Voltage: 90-264 V AC with active PFC.
Input Frequency: 47-63 Hz.
Input Current: 8 A at 115 V AC / 4 A at 230 V AC.
Inrush Current: Less than 40 A at 115 V AC / less than 80 A at 220 V AC.
Standby Consumption: Less than 0.5 W.
Hold Up Time: Greater than 16 ms at 230 VAC and full load.
Protection: Short circuit, overcurrent, and overvoltage protection.
Acoustic Noise: Less than 34 dB at full load.

Environmental and Safety Standards:

Operating Temperature: -10 to +70 °C.
Storage Temperature: -20 to +80 °C.
Humidity: Operating 10-85% RH, non-condensing; Storage 10-90% RH, non-condensing.
Safety/EMC: Compliant with TUV/EN 62368-1, UL 62368-1, IEC/EN 60950-1, UL 60950-1, CCC, CE.
MTBF: Greater than 267,000 hours according to MIL-HDBK-217F at 25 °C/full load, without fan.
Max Operating Altitude: 5000 m.

Design and Features:

Temperature Controlled and Silent Fan.
No Minimum Load Required.
ErP Lot 6 2013 Ready.
High Reliability Due to Premium Quality Components.
Dimensions: 150 x 140 x 86 mm ±0.5 mm.
Weight: 2.0 kg.

Output Specifications:

Output Voltage and Current: -5 V (0-0.2 A), +3.3 V (0-24 A), +5 V (0-20 A), +12 V1 (0-18 A), +12 V2 (0-18 A), +24 V (0-7 A), -12 V (0-0.5 A), +5 Vsb (0-3.0 A).
Ripple and Noise: Measured with a 20 MHz oscilloscope with connected 10 μF electrolytic capacitor and 0.1 μF ceramic capacitor at each output.
Combined Output Power: +3.3 V and +5 V must not exceed 120 W; 12V1 and 12V2 DC maximum output power shall not exceed 35A.

Additional Information:

This power supply is for assembly purposes only and must not be operated in an unassembled condition. The final assembly must comply with valid EMC standards.
Optional Accessories: Power cord with IEC-60320-C13 connector, length 1800 mm.

Catalog excerpts

Industrial PC power supplies Extended Delivery  Additional +24 V DC output  Efficiency up to 91 %  Increased interference resistance  Designed for continuous operation 24/7  No minimum load required  ErP Lot 6 2013 ready!  Temperature controlled and silence fan  Wide temperature range -10…+70 °C  High reliability due to premium quality components Te c h n i c a l d a t a Input voltage Input frequency Input current Inrush current Efficiency Standby consumption Hold up time Power-Good-Signal Protection Earth leakage current Acoustic noise Environmental Safety / EMC Temperature Derating MTBF Max. operating altitude Humidity Dimensions (W x D x H) Weight (net) 90…264 V AC, active PFC 47…63 Hz 8 A (115 V AC) / 4 A (230 V AC) <40 A (115 V AC) / <80 A (220 V AC) Up to 91 % <0.5 W >16 ms at 230 V AC and full load Switch on delay 100…500 ms Switch off delay 1 ms Short circuit protection: 3.3 / 5 / 12 V: shut down and latch off, +5 Vsb / -12 V, auto-recovery Overcurrent protection: +12 V: 22…30 A, +5 V: 30…45 A, +3.3 V: 35…60 A Overvoltage protection: +3.3 V (+3.5…+4.8 V), +5 V (+5.5…+7.0 V), +12 V (+13.4…+16.0 V) <1 mA <34 dB at full load IEC60068-2-64 (vibration and broadband random) TUV / EN 62368-1, UL 62368-1, IEC /EN 60950-1, UL 60950-1, CCC, CE Operating: -10…+70 °C / Storage: -20…+80 °C From +50 °C…+70 °C, 1 % / °C >267 000 h according to MIL-HDBK-217F at 25 °C / full load, without fan 5000 m Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 150 x 140 x 86 m

Open the catalog to page 1

Industrial PC power suppl' Article Output Output current Load Ripple & No. voltage min max regulation Noise Max. output power is 500 W, combined output power at +3.3 V and +5 V must not exceed 120 W. 12V1 and 12V2 DC maximum output power shaii not exceed 35A. Ripple and noise was measured by a 20 MHz oscilloscope with connected 10pf electrolytic capacitor and 0.1 pf ceramic capacitor at each output. This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards. Optional Accessories [>[>[> For...

Open the catalog to page 2

Industrial PC power supplies EMC – conducted LevelI (dBuV) Level (dBuV) Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 | [email protected] | www.bicker.de Measurement conditions Vin 230 VAC / 50 Hz Pout 500 W (full load) Tamb 22 °C

Open the catalog to page 3

Industrial PC power supplies Cable harness BEA-750H (+12V1) (+12V1) (+12V1) (+12V1) BLACK RED RED RED WHITE BLACK BLACK BLACK GREEN BLACK BLUE ORANGE BROWN BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK Specification is subject to change without notice. Errors excepted. Status as at: 09.09.2020 RED (+5V) BLACK (GND) BLACK (GND) YELLOW/BLACK (+12V2) YELLOW/BLACK (+12V2) BLACK (GND) BLACK (GND) RED (+5V) ORANGE (+3,3V) BLACK (GND) RED (+5V) BLACK (GND) A1 YELLOW/BLACK (+12V2) ORANGE (+3,3V) BLACK (GND) (+5V) RED BLACK (GND) A1 YELLOW/BLACK (+12V2) ORANGE (+3,3V) BLACK (GND) RED (+5V) BLACK (GND)...

Open the catalog to page 4