Industrial PC power supplies  High efficiency up to 92.5 %  Designed for continuous operation 24/7  No minimum load required!  ErP Lot 6 2013 ready!  Ball beared and temperature controlled fan with tachometer signal for monitoring  Increased interference resistance  Wide temperature range -10…+70 °C  High reliability due to premium quality components Extended Delivery Te c h n i c a l d a t a Input voltage Input frequency Input current Inrush current Efficiency Standby consumption Hold up time Power-Good-Signal Protection Earth leakage current Acoustic noise Environmental Safety / EMC Temperature Derating Design-lifetime MTBF Max. operating altitude Humidity Dimensions (W x D x H) Weight (net) 90…264 V AC, active PFC 47…63 Hz 8 A (115 V AC) / 4 A (230 V AC) <40 A (115 V AC) / <80 A (220 V AC) See diagram <0.5 W >16 ms at 230 V AC and full load Switch on delay 100…500 ms Switch off delay 1 ms Short circuit protection: 3.3 / 5 / 12 V: shut down and latch off, +5 Vsb / -12 V, auto-recovery Overcurrent protection: +12 V: 22…30 A, +5 V: 30…45 A, +3.3 V: 35…60 A Overvoltage protection: +3.3 V (+3.5…+4.8 V), +5 V (+5.5…+7.0 V), +12 V (+13.4…+16.0 V) <1 mA <34 dB at full load IEC60068-2-64 (vibration and broadband random) TUV/EN 62368-1, UL 62368-1, IEC / EN 60950-1, UL 60950-1, CCC, CE, EN 61000-6-2, EN 61000-6-4 Operating: -10…+70 °C / Storage: -20…+80 °C From +50 °C…+70 °C, 1 % / °C >5.7 years (230 V AC, +50 °C, 100 % load) >267 000 h according to MIL-HDBK-217F at +25 °C, without fan 5000 m Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 150 x 140 x 86 mm

Industrial PC power suppl' Article No. Max. output power is 500 W, combined output power at +3.3 V and +5 V must not exceed 120 W. 12V1 and 12V2 DC maximum output power shaii not exceed 35A. Ripple and noise was measured by a 20 MHz oscilloscope with connected 10pf electrolytic capacitor and 0.1 pf ceramic capacitor at each output. This power supply is for assembly purposes only and it must not be operated in unassembled condition. The final assembly has to comply with the valid EMC standards. [>[>[> For detailed information please visit our website www.bicker.de and refer to the article number....

Industrial PC power supplies Efficiency AC input Measurement conditions Vin 230 VAC / 50 Hz Pout 500 W (full load) Tamb 22 °C Level (dBuV) Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  

Industrial PC power supplies Drawing BEA-550K AC input Cable harness BEA-550K YELLOW YELLOW YELLOW YELLOW BLACK BLACK BLACK BLACK Specification is subject to change without notice. Errors excepted. Status as at: 09.09.2020 BLACK RED RED RED NC BLACK BLACK BLACK GREEN BLACK BLUE ORANGE BROWN RED BLACK BLACK YELLOW BLACK YELLOW YELLOW YELLOW YELLOW BLACK BLACK RED ORANGE BLACK RED BLACK A YELLOW 1 ORANGE BLACK RED BLACK A YELLOW 1 ORANGE BLACK RED BLACK YELLOW ORANGE BLACK RED BLACK A YELLOW 1 RED BLACK BLACK YELLOW ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED BLACK ORANGE ORANGE ORANGE...