Overview
The document describes the semi-automatic band saw models 370 SA DS MS and 420 SA DS MS, designed for cutting medium-sized solid parts and profiles with angular cuts up to 60° right and 45° left. These machines enhance the basic features of a manual saw with the advantage of a semi-automatic cutting cycle using hydraulic movement.

Technical Specifications
- Welded structure base
- Tempered aluminum arc mounted on tapered roller bearings
- Arc and vise support group made of spheroidal cast iron
- Gear reducer group with tempered and ground gears
- Mechanically tensioned blade with electrical control
- Adjustable WIDIA guide pads
- Rapid ascent and descent
- Hydraulic control unit
- Hydraulic sliding vise for material clamping
- Arc control cylinder positioned near the fixed pad
- Infinitely adjustable cutting feed
- Adjustable pressure based on material section and type
- Dual safety button for cycle start
- Low voltage electrical system compliant with CE standards
- Red RAL 3001 finish and blue RAL 5014 base

Standard Accessories
- 0-500 mm millimeter rod with stop
- Entry and exit roller
- Band cleaning brush

Optional Accessories
- Material entry and exit roller in various lengths
- Millimeter rod in various lengths with mechanical stop
- Vise pressure regulator
- Speed variator from 20 to 100 m/min
- Dry cutting device
- Hydraulic movement of the vise group

Technical Data
- Cutting speed: 35-70 m/min (standard), 20-100 m/min (optional)
- Worktable height: 830 mm
- Cutting pressure: 5-20 bar
- Blade motor power: 0.9-1.5 kW
- Hydraulic pump motor power: 1.1 kW
- Coolant pump power: 0.18 kW
- Transport dimensions: 1500x800x1700 mm
- Weight: 480 kg (370 model), 495 kg (420 model)

Cutting Capacity
- Model 370: Up to 160x160 mm at 60° right, 250x100 mm at 60° left
- Model 420: Up to 170x170 mm at 60° right, 250x100 mm at 60° left

Recommended Blades
- Bimetal cobalt M42 blades
- Tooth pitch recommendations based on material section

Company Information
BIANCO srl reserves the right to make modifications to improve functionality and performance without prior notice. Contact details and further information are provided for BIANCO srl, located in Carobbio degli Angeli, Italy.