- Catalogs
- BIANCO srl
- Mod. 330 SAE 60°
Mod. 330 SAE 60°
Mod. 330 SAE 60°
The document describes the technical specifications and features of the semi-automatic cutting machines models 330, 370, and 420 SAE 60°. These machines are designed for cutting medium-sized solid and profiled materials at angles up to 60°. They are suitable for both artisanal and industrial applications due to their compact size and high reliability.
Technical Specifications
- Construction: Welded base structure with a tempered aluminum arch mounted on tapered roller bearings.
- Components: Spheroidal cast iron vice group, gear reducer with hardened and ground gears, adjustable widia guide pads, and a fixed guide pad for 90° cuts.
- Operation: Rapid descent and ascent controlled by a sensor, hydraulic control unit, and an arc control cylinder near the fixed guide pad.
- Cutting: Infinitely adjustable cutting feed with pressure regulation based on material section and type.
- Safety: Dual safety button for cycle start and a dedicated PLC.
- Electrical: Low voltage electrical system compliant with CE standards.
- Finish: Red RAL 3001 and blue RAL 5014.
Standard Accessories
- Millimeter rod 0-500 mm with stop.
- Piece discharge chute.
- Entry roller.
- Belt cleaning brush.
Optional Accessories
- Material entry and exit roller conveyors in various lengths.
- Millimeter rod in various lengths with mechanical stop.
- Vice pressure regulator.
- Dry cutting device.
- Speed variator from 20 to 100 m/min.
Model Specifications
- Model 330 SAE 60°: Cutting capacity up to 330x140 mm, belt dimensions 3010x27x0.9 mm, weight 400 kg.
- Model 370 SAE 60°: Cutting capacity up to 370x140 mm, belt dimensions 3120x27x0.9 mm, weight 450 kg.
- Model 420 SAE 60°: Cutting capacity up to 420x160 mm, belt dimensions 3270x27x0.9 mm, weight 500 kg.
Technical Data
- Cutting speed: 35-70 m/min.
- Worktable height: 830 mm.
- Motor power: Blade motor 0.9-1.5 kW, hydraulic pump motor 1.1 kW, coolant pump 0.18 kW.
- Transport dimensions: 1500x800x1700 mm.
Recommended Blades
- Bimetal cobalt M42 blades are recommended, with specific tooth configurations based on material section.
Additional Information
BIANCO srl reserves the right to make modifications to improve functionality and performance without prior notice.
Catalog excerpts
Dimensioni nastro Dimensioni d’ingombro Dimensioni nastro Dimensioni d’ingombro Dimensioni nastro Dimensioni d’ingombro CARATTERISTICHE TECNICHE Basamento in struttura saldata • Arco in alluminio temprato, montato su cuscinetti a rulli conici • Gruppo morsa in ghisa sferoidale • Gruppo riduttore composto da ingranaggi temprati e rettificati • Pattini guidalama regolabili in widia • Pattino posteriore regolabile per tagli a 90° • Discesa e salita rapida controllate da tastatore • Centralina oleodinamica di comando • Cilindro comando arco posto in prossimità del pattino guidalama fisso • Avanzamento...
Open the catalog to page 2All BIANCO srl catalogs and technical brochures
Mod. 200 M 60° M1-M2-M3-M42 Pages
Mod. 280 M 60°2 Pages
Mod. 280 M DS MP2 Pages
Mod. 330 M 60°2 Pages
Mod. 370 M DS MP2 Pages
Mod. 370 M DS MS2 Pages
Mod. 420 M 60°2 Pages
Mod. 420 M DS MS 45-602 Pages
Mod. 280 SA 60° - Right2 Pages
Mod. 370 SA 60°2 Pages
Mod. 370 SAE 60°2 Pages
Mod. 420 SA DS MS2 Pages
Mod. 370 AE 60°2 Pages
Mod. 370 AF 90°2 Pages
Mod. 420 A 60°2 Pages
Mod. 370 AE 60° CNC2 Pages
Mod. 370 AF 90° CNC2 Pages
Mod. 420 A 60° CNC2 Pages
Mod. 330 AE 60° CNC2 Pages
Mod. 370 A 60° CNC2 Pages
370 M 60°2 Pages
420 SAE 60°2 Pages
420 SA 60°2 Pages
280 SA 60°2 Pages
330 AE 602 Pages
Mod. 61.41sa DS 60°2 Pages
Mod. 370 SA DS MS2 Pages
Mod. 370 SA DS2 Pages
Mod. 370 M DS2 Pages
Mod. 370-420 sa 60°2 Pages
Mod. 330-370-420 M 60°2 Pages
Mod. 280sa 60°2 Pages
Mod. 280 M 60°2 Pages
Mod. 370 loading unit2 Pages
Mod. 330 A 60°2 Pages
Mod 330 SA 60°2 Pages
Mod. 200 M. 60°2 Pages